Key Features
•
950 Possible frequencies in 24MHz operating
band
•
Optimized audio path to provide true wired
microphone sound
•
Rugged machined aluminum handheld
transmitter with interchangeable microphone
elements
•
Cast magnesium bodypack transmitter is
extremely light and durable.
•
5mW or 50mW transmit power on every
transmitter
•
REV-Link PC software monitoring and control
of the receivers
•
Advanced ClearScan™ scans for the clearest
channel and group of channels.
UHF Wireless
Microphone System
General Description
The RE-V Wireless Microphone system combines frequency agility
and ease of use like no other. The RE-V transmitters and receivers
operate over a 24 MHz bandwidth in the UHF portion of the
spectrum. The high quality audio circuitry and advanced Radio
Frequency (RF) signal processing offer broadcast quality signal-to-
noise and audio clarity.
By combining four different frequency bands up to 44 simultaneous
systems can work together on one stage. Advanced Clearscan™
scans all available channels and displays a sorted list of the best
coordinated groups of channels. The scanning continues and sorts
for the clearest channels in the coordinated group giving the user
the best possible channel for their location.
The entire audio path has been optimized to provide the truest
representation of a wired microphone sound possible in a wireless
system. The Electro-Voice exclusive guitar audio optimization in
the bodypack transmitter and the receiver combine to give that
"wired" sound back to the bassist and guitarist. The guitar setting
lowers the low end response down to 30Hz, pads the input, and
changes the audio for the best response possible from a wireless.
The all new REV-H concert handheld transmitter is about the size
and shape of a wired microphone to encourage proper microphone
technique and uninhibited performances. An alternative REV-PH
presentation handheld includes a user accessible on/off/mute
switch and another lightweight, small handheld.
The Single and Dual receivers are full 19" rack mount units with
integrated mounting hardware and IEC universal power supplies.
The REV-D features antenna pass through that allows 6 channels
of receive to be connected to two antennas with just the cables that
come with the units. Both units have parallel RJ45 jacks that allow
the connection of CAN bus monitoring and control with a PC
through the UCC-1 USB to CAN converter.
REV