Ipevo wireless presentation system Quick Start Manual

Quick Start Guide
Wireless Presentation System

Setting up WPS

VGA port
Contents
Congratulations on your purchase of the Wireless Presentation
System (WPS). With the WPS, your projector can wirelessly
communicate with any WiFi-enabled computer or laptop in
order to project desktop contents quickly and efficiently.
This Quick Start Guide is intended to help you begin
immediately enjoying the benefits of wireless projection.
Your package should contain the following:
• Wireless Presentation System (WPS) Dongle
• U niversal Power Adapter (DC 5V) with 5 interchangeable
plugs
• VGA Extension Adapter
• CD-ROM with WPS software and full User Manual
• Quick Start Guide (this document)
Note: For a complete explanation of the features of WPS,
please refer to the user manual included on your CD-ROM.
The Wireless Presentation System is compatible with both
PC and Mac. Follow these steps to set up your projector and
computer for wireless projection.
1. I nsert the WPS Dongle into the VGA adapter on the back
of your projector. Use the black gears on either side of the
dongle to securely tighten the screws of the unit into the
projector.
2. I f your projector has PoVGA (Power over VGA) technology,
a power supply is not needed. If there is no PoVGA, attach
the power supply to the back of the dongle. Insert the
appropriate plug for your country/region into the adapter
firmly until the tab clicks into place. Tab may be slid down
in order to remove plug.
3. The projector will project a Startup screen. Important
information on this screen includes a Login code and the
Server IP of the WPS: 192.168.100.10.