Cisco RV315W Datasheet page 3

Table 1 lists the port specifications for the Cisco RV315W.
Table 1.
Port
Functionality
Scenarios
The following are some typical scenarios for the Cisco RV315W:
Internet access with integrated VPN for small businesses
Dual WAN for Internet connectivity: GE0 and GE1 can connect to the same or different Internet service
●
providers (ISPs), for load balancing or redundancy in case of failure.
Single WAN for Internet connectivity: GE0 can connect to an ISP, and GE1 can be configured as a GE LAN
●
port, connecting to switches for more endpoint devices.
3G mobile wireless connectivity: The 3G capability can serve as emergency backup for the GE WAN ports
●
or as an independent WAN connection when the RV315W is deployed in places where a landline Internet
connection is not available.
VPN access: Several locations can be connected through site-to-site VPN. Employees can also access the
●
office network and resources with remote-access VPN.
Figure 4.
Branch VPN router for franchises
Site-to-site VPN with dynamic public IP: The Cisco RV315W can serve as an Internet gateway with dynamic
●
address (Point-to-Point Protocol over Ethernet [PPPoE], Dynamic Host Configuration Protocol [DHCP])
connecting to a VPN concentrator at corporate headquarters.
Site-to-site VPN through Network Address Translation (NAT): The RV315W can be located behind the
●
Internet gateway with a private IP address, connecting through NAT to a VPN concentrator at corporate
headquarters.
© 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public.
Port Specifications
USB1 USB2
3G/LTE access Storage for syslog
Cisco RV315W Internet Access Topology
GE0 GE1
10/100/1000 Mbps, 10/100/1000 Mbps,
WAN0 WAN1/LAN0
FE1 to FE8 WLAN
10/100 Mbps, LAN1 802.11b/g/n, 2.4
to LAN8 GHz
Page 3 of 9