Source; Audio; Operating Instructions - Bluetooth Mode; Overview - Chrysler Uconnect Touch User Manual

Controlling the Auxiliary Device
The control of the auxiliary device (e.g., selecting play-
lists, play, fast forward, etc.) cannot be provided by the
radio; use the device controls instead. Adjust the volume
with the ON/OFF VOLUME rotary knob, or with the
volume of the attached device.
NOTE: The vehicle radio unit is acting as the amplifier
for audio output from the Auxiliary device. Therefore if
the volume control on the Auxiliary device is set too low,
there will be insufficient audio signal for the radio unit to
play the music on the device.

Source

Touch the Source soft-key to select the desired audio
source, CD, AUX or USB. This screen will time out after
a few seconds and return to the main radio screen if no
selection is made.
Uconnect Touch™ 4.3 SYSTEM 27

Audio

Refer to Operating Instructions – Radio Mode for adjust-
ing the audio settings.
OPERATING INSTRUCTIONS – Bluetooth MODE

Overview

Bluetooth Streaming Audio (BTSA) or Bluetooth Mode is
entered by pairing a Bluetooth device, containing music,
to the Uconnect Touch™ system.
Before proceeding, the Bluetooth device needs to be
paired through Uconnect™ Phone in order to communi-
cate with the Uconnect Touch™ System.
NOTE: See the pairing procedure in the Owner's
Manual on the DVD for more details.
Once the Bluetooth device is paired to the Uconnect
Touch™ System, touch the Player hard-key located on
the left side of the display. Once in Player Mode, touch
the source soft-key and select Bluetooth.
2