7) Slide the SRT-6 towards the bottom end to
release the clip on the side of the phone. Then
release the two shown clips on the bottom end by
sliding the SRT-6 to the direction shown.
9) Protect the LCD with a protective film.
11) First release the clips at the bottom end with
the sharp end of the SS-93.
13
8) Carefully lift up the A-COVER from the left side to
release the shown clip. Remove the A-COVER ASSY
and check that the clips remained unharmed.
10) To remove the KEYMAT ASSY, release all seven
clips shown.
12) Then release the three clips on the side.
Confidential Copyright © 2010 NOKIA All rights reserved
Nokia 2710 Navigation Edition
RM-586
Service Manual Level 1&2
Version 1.0
ISSUE 1