Technical Specifications
Filter Type
Control Range
3-Way Mono Mode Operation
Input Impedance10k ohms
Input Connections
Output Impedance
Output Connections
Input Gain
Output Gain (all Outputs)
Maximum Input Level Accepted
Maximum Output Level
Signal to Noise Ratio
Total Harmonic Distortion
Common Mode Rejection Ratio
Power Requirements
Size (H x W x D)
Weight
LS4
24dB/Octave Active Stereo Crossover
Two 24dB/octave Linkwitz-Riley state variable filters
50 - 1kHz (X1)
500 - 10kHz (X10)
Internally Wired
Balanced XLR & 1/4" T/R/S
2.2k ohms
1/4" T/R/S
0dB @ "10"
6dB
+21dBm (0dB = 0.775V rms)
+21dBm (0dB = 0.775V rms)
>98dB
0.01% @ 1kHz
>50dB @ 1kHz
10VAC @ 1400mA 50/60Hz
1.75" x 19" x 6"
4 lbs.
Due to ongoing product development and improvement, the specifications
contained herein are subject to change without notice.
©1999 SLM Electronics, Inc. • A Division of St. Louis Music, Inc.
1400 Ferguson Avenue • St. Louis, MO 63133
www.crateamps.com
47-507-03 • 04/99