Your Halcro Logic UTSR1 integrates your homes Infrared remote controls, to deliver instant audiovisual action. Key Features Pre-Programmed with learning capability 9-in-1 remote (replace HALCRO dm 8/10, HALCRO Processor, CD, TV, SAT TV, CBL TV, DVD, AUX 1 &...
Page 4
Remote Control 1. Infra-red Lens 6. Touch Screen Panel 2. Green LED Indicator 7. Short Cut Keys 3. Battery Level Meter 8. Hard Keys 4. Current Time 9. Connection Jack 5. Current Mode 10. Battery Compartment...
(DC9V, 400mA, 3.6VA) x 1, Connector x 1 (for charging purpose), 4 x AAA size NiMH rechargeable batteries Optional Accessories: Halcro Logic Docking Station – Quick charger, PC Link software for MS Windows 98SE, Windows 2000, Windows NT, Windows XP and USB Cable...
Page 6
Remote Control Note: Both the Halcro Logic Remote Control and Docking Station comply with limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Battery Installation and Charging Your Halcro Logic UTSR1 is supplied with 4 x AAA NiMH rechargeable batteries, a connector and a charging adaptor. We recommend you charge your batteries over night (10 hours) before 1 time use. The battery meter...
MENU to set up the unit Panel Calibration Please follow the below instruction for calibration of the Halcro Logic UTSR1. If you experience any incorrect response from the touch screen, please re- calibrate the unit. MENU to set up the unit ...
Note: If your Halcro Logic UTSR1 does not respond, you can reset the remote by pressing the RESET key inside the battery compartment (see illustration). This product may need to be manually reset under high electrostatic discharge. Hot Keys There are 3 Hot keys on the bottom of LCD display, ...
Select a device where you would like to carry the command keys (e.g. TV) Tap a key to be learnt from the Halcro Logic UTSR1 Aim an original remote to the front of Halcro Logic UTSR1. Press and hold the key until Halcro Logic UTSR1 responds with a successful message (approx.
Page 11
Select a device which you would like to carry the command keys (e.g. TV) Tap a key to be learnt from the Halcro Logic UTSR1 Aim the original remote to the front of the Halcro Logic UTSR1. Press and hold the key until Halcro Logic UTSR1 responds with a successful message (approx.
Page 12
Search Setup section in this manual. Enter Code – setup pre-programmed code by entering code number. (Halcro Logic UTSR1 is preloaded with numerous control codes for most popular AV equipment; you can refer to the enclosed code list for your devices.) ...
If you have missed the last code, tap once to skip backward Tap Back to cancel and return to previous menu page Tap OK to confirm and exit the setup Note: When a code is set to a device, the learned command and key name of that device will be lost, and restored to pre-programmed command.
Page 14
Remote Control Device Name - rename device label Tap DEVICE NAME from Edit menu Select a device , or for quick access to different groups of keys (Character, Symbol or Graphic), and tap to access different pages of each group of keys ...
Preference MENU then tap PREFERENCE and choose any one of the following items: Punch Through – set up device punch through for Volume Control, Volume + / - and Mute. Tap PUNCH THROUGH from Preference menu Select a source device (e.g. HALCRO dm 8/10) ...
Page 16
Note: Universal password is AAAAA Reset Default – reset user setting to factory default. Warning: Please make sure it is necessary to perform this function. Your Halcro Logic UTSR1 will be reset to factory pre-loaded setting learned signals/custom setting will be erased.
Page 17
One Device – clear learned command of all keys of a device. Tap to select a device Tap Yes to confirm or tap No to abort All Devices - clear all learned commands of all devices. Tap All Devices ...
Back to return to Remote Setting menu Smart Halcro Logic UTSR1 comes with 10 editable SMART programs each with a maximum 32 key steps. With the help of SMART, you can program a group of commands and time delay to execute in a chain of IR signals simply by the press of SMART button.
Page 19
MENU, then tap Smart and choose any one of the following items: Add New Smart – create a new smart command. Select an empty smart key Tap ADD KEY to select a device and a key to add it into smart list ...
Note: Before you perform this function, please make sure that you have two (2) Halcro Logic UTSR1s. You have to identify which unit is the sender and which one is the receiver. The sender is the unit which contains data that will be transferred to another Halcro Logic UTSR1 (receiver unit).
Be sure to keep two remotes within 5 to 8cm during the copy process for better performance. PC Link To connect your Halcro Logic UTSR1 with a computer to download/upload data, Tap MENU, then choose PC Link. Note: To enable PC-to-remote data upload/download function, you must use the Halcro Docking Station.
Before operating the Halcro Logic Docking Station, please read this manual. Key Features Fast charging device for your Halcro Logic UTSR1 Connecting your Halcro Logic UTSR1 to home computer system for remote advanced editing and data back up (PC Link) ...
Page 23
1. Docking Station 5. LED Indicator 2. Remote Holder 6. Power Connector 3. Connection Pins 7. USB Jack 4. Release Button...
Docking Station Quick Charger Function Make sure that your Halcro Logic UTSR1 is installed with 4xAAA NiMH rechargeable batteries and remove the rubber protector Make sure you have the DC power adaptor from the Halcro Logic UTSR1 package ...
Run the Halcro Editor software from your computer system Note: For operating the Halcro Editor software, please follow the instruction manual from the software package. Maintenance Do not expose your Docking Station to dust, strong sunlight, humidity, high temperature, or mechanical shock ...
Troubleshooting UTSR1 My Halcro Logic UTSR1 is Make sure the provided not working. rechargeable batteries are inserted with correct polarity and are fully charged. Try pressing the Reset button inside the battery compartment. (Refer to page 9 for details) I have installed a code...
Editing via Computer. Make sure you have activated the PC Link function from the Halcro Logic UTSR1. Note: The Halcro Logic UTSR1 and Docking Station contain no user serviceable parts. For all service requirements please contact your dealer.
Service & Warranty Service Information The Halcro Logic Universal Touch Screen Remote (UTSR1) and Docking Station have been designed for maximum reliability. If a problem does occur with your unit, please contact your dealer. Do not open the cover, or try to modify or repair the products yourself.
IMPORTANT - Please read the following details very carefully. The Halcro Logic Universal Touch Screen Remote (UTSR1) and Docking Station are warranted to be free of defects if used under normal conditions for a period of ninety (90) days from the date of purchase. To...