Table of Contents
Advertisement
System Preferences:
Using the remote's control arrows, change the Screen Saver Delay and Slideshow Delay to your
desired settings. To change a setting, please highlight the specific item and press the ENTER key on
your remote control. You can then increase or decrease the value by using the up and down controls
on the remote. Once the value has been changed, press the ENTER button again to lock in the
setting.
Screen Saver Delay – This is the time of inactive use required by the LinkTheater before it activates
its internal screen saver. The screen saver is used to protect your TV or monitor from image burning.
Some types of displays (specifically CRT tubes) are especially easy to burn images into. It is
recommended that the screen saver be used when the LinkTheater is not being used.
Slideshow Delay – This is the amount of time a picture or graphics file will be displayed before
the next file is displayed. This amount of time is only pertinent when doing a slideshow of multiple
images.
26
Advertisement
Table of Contents
