Belkin F7D4515 User Manual page 18

sCreenCasT aV seTTInGs
adding/deleting a Transmitter
ScreenCast AV is part of the WHDI
possible to connect a variety of other ScreenCast
transmitters to your ScreenCast AV receiver.
Some of those transmitters have a single video source, while
others have multiple sources. When a transmitter gets added, all
of its sources get added to the list of sources to choose from on
the main on-screen display (the one used for switching sources).
Transmitters will vary in terms of capabilities, so please
refer to the manufacturer info for details on how they
would work with your ScreenCast AV receiver.
Using your ScreenCast AV remote, use the menu
button to open up the menu screen and navigate to the
"Settings" section; you will see the screen below.
family, so it is
™
adding a Transmitter
In the Settings menu, select "Add or Delete a transmitter." On the
screen that shows next, you will choose "Add a transmitter."
Next you'll be instructed on how to connect the new transmitter.
Press the Pair button on the receiver and then press the Pair button
on the new transmitter; the process is similar to how a Bluetooth
headset connects to a mobile phone. The transmitter and receiver will
exchange information and create a secure connection with each other.
Pairing could take up to 60 seconds.
16
®