Table of Contents
Advertisement
125983250.qxp
2006-03-21
Removing transport safety equipment
Caution! Before first starting up,
all parts of the transport safety
equipment must be removed.
1.Open loading door
2. Pull off adhesive strips from inside
machine on top of drum.
3. Remove foil hose and polystyrene
padding from the machine.
Electrical connection
Details on mains voltage, type of current and the fuses required should
be taken from the type plate. The type plate is fitted near the loading
aperture (see "Machine description" section).
The power supply cable must be accessible after installing the machine.
11:11
Page 27
27
Advertisement
Table of Contents
