AEG FAVORIT 64850 User Information page 9

Setting electronically:
1. Press the ON/OFF button.
If indicators other than the ON/OFF button are lit, a programme has
been selected. The programme must be cancelled:
Press function buttons 1 and 2 simultaneously for approx. 2 seconds.
All other indicators will go out.
2. Press function buttons 1 and 2 simultaneously and keep them
pressed. The LED indicators for function buttons 1 to 3 will flash.
3. Press function button 1 again.
The LED indicator for function button 1 will flash.
The multi-display will indicate the hardness setting.
4. Pressing function button 1 increases the hardness setting by 1.
(Exception: hardness setting 1 follows hardness setting 10).
5. When the hardness setting is correct, press the ON/OFF button.
The hardness setting is now saved.
If the water softener is set electronically to "1", this switches off the
control indicator for special salt.
Water hardness
in °d 1 in mmol/l 2
51 - 70 9,0 - 12,5
43 - 50 7,6 - 8,9
37 - 42 6,5 - 7,5
29 - 36 5,1 - 6,4
23 - 28 4,0 - 5,0
19 - 22 3,3 - 3,9
15 - 18 2,6 - 3,2
11 - 14 1,9 - 2,5
4 - 10 0,7 - 1,8
unter 4 unter 0,7
1) (°d) German degree, measure of water hardness
2) (mmol/l) millimol per litre, international unit for water hardness
*) factory setting
Adjusting the hardness
setting
Manual
Range
IV
*2
III
II
I/II
1
I
Operating instructions
Indication on
the
Electronic
multidisplay
10
9
8
7
6
*5
4
3
2
1
no salt
necessary
9