Setting The Rinse-Aid Quantity To Be Added; Adding Dishwashing Detergent - AEG ÖKO FAVORIT 6480 Operating Instructions Manual

Setting the rinse-aid quantity to be added

The correct dosage of the rinse-aid should be regulated on the basis of the
shine and drying results. For this purpose, set the quantity of liquid by means
of the six-position selector (C) located on the inside of the filler opening (min-
imum quantity is position 1, maximum quantity is position 6). Use the tip of a
knife or a screwdriver to rotate the selector. If drops of water or white marks
remain on the crockery after it has been washed, gradually increase the
dosage. If the crockery comes out with whitish, sticky streaks, reduce the
dosage.
C
BR02
Fig. 5

Adding dishwashing detergent

Use only tablets, powder or liquid detergents specifically designed for
domestic dishwashers.
Before starting any of the dishwashing programmes, except for the rinse and
hold programme, load the detergent in the dispenser. To open the dispenser
lid, pull the catch (D). This will open it. To help you to correctly dose the right
amount of detergent, inside the container there are two reference marks:
- MIN = 15 ml - MAX = 30 ml
D
D E1 2
Fig. 6
56