Removing The Spare Tire And Tools - Chevrolet Avalanche Owner's Manual

Removing the Spare Tire and Tools

The jack and the wheel blocks are located under a
cover near the passenger side rear seat.
To remove the jack and wheel blocks, do the following:
Rear seat (passenger side) jack cover
1. Remove the jack cover by turning the two wing nuts
one-quarter turn counterclockwise and pulling the
jack cover off.
A. Wheel Blocks
B. Knob
C. Wing Nut
D. Retaining Hook
2. Release the jack (E) from the mounting bracket (G)
by turning the knob (B) on the jack counterclockwise
to lower the jack head (F) from the mounting bracket.
3. Remove the wheel blocks (A) attached to the
jack (E) by turning the wing nut (C)
counterclockwise. Place the wheel blocks where
needed as indicated in the previous caution.
E. Jack
F. Jack Head
G. Mounting Bracket
5-79