English GENERAL POWER TOOL SAFETY WARNINGS moment of inattention while operating power tools may result in serious personal injury. Use personal protective equipment. Always wear WARNING ■ eye protection. Protective equipment such as dust Read all safety warnings and all instructions. mask, non-skid safety shoes, hard hat, or hearing Failure to follow the warnings and instructions protection used for appropriate conditions will reduce...
English GENERAL POWER TOOL SAFETY WARNINGS Keep children and visitors away. Visitors should wear safety glasses and be kept a safe distance from work area. Do not let visitors contact tool or extension Keep cutting tools sharp and clean. Properly ■...
OFF, release the switch trigger. ■ Mixing paint VARIABLE SPEED This product will accept Ryobi One+ 18 V lithium-ion battery packs and Ryobi One+ 18 V nickel-cadmium The variable speed switch trigger delivers higher speed battery packs. with increased trigger pressure and lower speed with decreased trigger pressure.
Page 7
English OPERATION Open or close the chuck jaws to a point where the ■ opening is slightly larger than the bit size you intend to use. Also, raise the front of the drill slightly to keep DIRECTION OF ROTATION SELECTOR the bit from falling out of the chuck jaws.
When these situations occur, drill has a tendency WARNING: to grab and kick opposite to the direction of When servicing, use only identical Ryobi rotation and could cause loss of control when replacement parts. Use of any other parts may breaking through material.