Related Manuals for GMC VEC156-AU
Summary of Contents for GMC VEC156-AU
- Page 1 1,000,000 POWER SERIES RECHARGEABLE SPOTLIGHT VEC156-AU INSTRUCTION MANUAL 051010 ED11 PS...
-
Page 2: Table Of Contents
Contents Warranty Description of symbols Specifications Safety instructions Additional safety instructions for spotlight Additional safety instructions for charger Know your product Unpacking Operation AC Power Charging DC Power Charging LED Indicators Using the spotlight Replacing the Spotlight Replacing the Battery Pack Replacing the DC Plug Fuse Maintenance Full 2 Years Home Use Warranty... -
Page 3: Description Of Symbols
Dear Customer If you require any help with your product, whether it � is a Warranty claim, spare part or user information, please phone our Help Line for an immediate response. Phone 1300 880 001 in Australia or 0800 445 721 in New Zealand. Introduction Your new GMC power tool will more than satisfy your expectations. -
Page 4: Specifications
Specifications Charger Input: 240V AC 50Hz Output: 12V DC 300mA DC charger adaptor fuse 0.5A SpotLight Spotlight Bulb: 6V 55W Max Type H-3 Battery: Maintenance free, sealed lead acid, 6V, 3 Amp hour DC charger adaptor fuse: 0.5A Weight: 1.5kg Length: 209.5mm Width:... - Page 5 Personal Safety 1. Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating power tools may result in serious personal injury.
-
Page 6: Additional Safety Instructions For Spotlight
Additional safety instructions for the spotlight WARNING. Contains non-spillable sealed lead acid battery. Must be recycled or disposed of properly. DO NOT dispose of batteries in fire, as this may result in an explosion. DO NOT open battery or short circuit, as this may cause the battery to leak or get hot causing personal injury. - Page 7 • To reduce the risk of an electric shock, unplug the charger from the power supply before attempting to clean it. • Never attempt to connect two chargers together. • Do not store or use the tool and battery pack in locations where the temperature may reach or exceed 104°F (40°C) such as alongside sheds or metal structures in the summer.
-
Page 8: Know Your Product
Know your product 1. Trigger switch 2. Trigger switch lock 3. Quartz halogen bulb 4. Rubber bezel 5. AC/DC recharge port 6. LED Indicator 7. LED Indicator Switch 8. Pistol grip handle 9. Lanyard 10. DC charge adapter 11. AC charge adapter... -
Page 9: Unpacking
Unpacking Due to modern mass production techniques, it is unlikely that your GMC Power Tool is faulty or that a part is missing. If you find anything wrong, do not operate the tool until the parts have been replaced or the fault has been rectified. Failure to do so could result in serious personal injury. -
Page 10: Led Indicators
LED indicators The spotlight has 3 LED indicators (6) which indicates battery level when in operation and status whilst charging. First red LED indicates battery is in a low level of charge. Second red LED indicates battery is partially charged. Green LED indicates battery is fully charged. -
Page 11: Replacing The Battery Pack
5. Carefully remove the reflector and bulb assembly (fig. G). 6. Disconnect the bulb wire from the red power wire (fig. H). 7. Unsnap the hairpin retaining wires from the reflector’s flange (fig. I). 8. Using the screwdriver, loosen the retaining screw to remove the bulb from the reflector (no need to completely remove this screw). -
Page 12: Replacing The Dc Plug Fuse
Replacing the DC fuse plug The fuse in the DC plug (10) protects the charging circuit of the DC Recharge Adapter. If the AC recharger operates but the DC charging adapter does not, then the fuse may be opened. To replace the fuse: 1. - Page 16 Carefully read the entire Instruction Manual before using this product. Before returning this product for a Warranty Claim or any other reason Please Call 1300 880 001 (Australia) or 0800 445 721 (New Zealand) When you make your call, please have the following information at hand: GMC Product Type GMC Product Code A GMC Service Engineer will take your call and, in most cases, will be able to solve your problem over the phone.