98CUP_2013 Release
NOTE : The chassis number must correspond to the roll cage number. These 2 parts are
indissociable. It is strictly forbidden to change them separately.
The non respect of this rule is a technical non conformity
B.1.3 HOLOGRAMS
The bodywork parts and certain mechanical
components are identified using embossed
hologram
disks
(see
marked parts).
The wording "NO PAINT " indicates you
must not paint over the hologram under any
circumstances.
The
presence
of
mandatory. The absence of hologram(s)
may
be
regarded
compliance
and
event
require that the part(s) in question be
replaced.
B.1.4 MARKINGS
Certain
mechanical
identified
using
an
Appendix/List of marked parts).
An engraving is proof that the part is
genuine, but does not confirm that it
complies with regulations.
The
absence
of
engraving(s)
regarded as technical non-compliance and
event organizers may require that the
part(s) in question be replaced.
Appendix/List
of
the
holograms
is
as
technical
non-
organizers
may
components
are
engraving
(see
may
be
C-5
Supplier engraving examples :
Renault Sport engraving :