SECTION 3
The SuperPulse Generator described in this manual, in conjunction with the available accessories, is
designed to be used as a system to provide advanced electrosurgical effects during endoscopic urological
surgery under normal saline irrigation.
3A. Responsibility of the Manufacturer
The manufacturer is responsible for safety, reliability and performance of the equipment only if:
Installation procedures in this manual are followed.
Assembly operations, extensions, re-adjustments, modifications or repairs are carried out by
persons authorised by the manufacturer and the electrical installation of the relevant operating
room complies with local codes and regulatory requirements.
The equipment is used in accordance with this User Manual, the Instructions For Use which
accompany all system components and any additional information contained on the component
package labelling.
3B. SuperPulse Generator Power Requirements
Please refer to section 10-1 for full voltage detail.
Check the SuperPulse Generator Power Connection
The power connector meets all requirements for safe grounding. Its purpose should not be defeated
by using extension cords or any form of adapter. When disconnecting from the mains socket or from
the SuperPulse Generator, cords should always be grasped by the plug. Do not pull on the cord itself.
3C. Grounding of the SuperPulse Generator
To ensure user safety the SuperPulse Generator must be properly grounded through the inlet plug
and power cord. Use only hospital grade power cords.
IMPORTANT
3D.
Routine Maintenance of the SuperPulse Generator
It is recommended that the SuperPulse Generator be inspected by qualified service personnel in
accordance with Section 13, Periodic Equipment Safety Checks.
Gyrus ACMI PlasmaKinetic SuperPulse Generator (Endourology)
Part Number: 144020-LB
Ensure that the electrical installation of the relevant room complies with local
codes and regulatory requirements.
USER MANUAL
INSTALLATION
Page 3-1
Need help?
Do you have a question about the PlasmaKinetic and is the answer not in the manual?