Page 2
Cover Dome UV Coated BW-2981 Dimensions: Length, dome to handle 425mm, Width 150mm, Height, excluding bracket 135mm, Weight 4.5 Kg, 9lb 14oz Due to our policy of constant product improvement Bowens International reserve the right to change equipment specifications without notice.
Sync. from the camera and use an adapter to reverse it if necessary. The The Esprit Digital 750 is protected by a 10A (T) 20mm fuse and a separate 4A (F) 20mm DIGITAL 750 supplies a positive SYNC. voltage of 14V with respect to the chassis Ground.
Page 4
QUICK START GUIDE MODELLING LAMP REPLACEMENT The Esprit Digital 750 is very simple to operate once the user has become familiar with the Before attempting to replace the modelling lamp always switch the unit off and unplug it from controls. Detailed operating instructions are given after this Quick Start Guide.
Page 5
This allows the user to customise certain functions without complicating the main controls. The fast recycling feature of the Esprit Digital 750 allows a rapid sequence of high power flashes to be obtained. However, this feature should be used sparingly since continuous...
Page 6
Esprit Digital 750 Operating Instructions Esprit Digital 750 Operating Instructions UP & DOWN Buttons OPTIONS Select the required ‘FUNC’ as detailed above. Firmware Version Single presses of the ‘UP’ or ‘DOWN’ buttons will increment or decrement the value by one.
Esprit Digital 750 Operating Instructions Esprit Digital 750 Operating Instructions AUTO BRACKETING (+B & -B) Buttons INFRA-RED REMOTE CONTROL The B+ or B- buttons enable the user to automatically bracket exposures without having to The unit has a built in receiver for the optional Infrared Remote Control Transmitter. Switch adjust either the camera or the flash power settings.
Esprit Digital 750 Operating Instructions Esprit Digital 750 Operating Instructions MODELLING LAMP CONTROLS & OPERATION AUXILIARY FUNCTIONS Four modelling lamp modes are available. Each press of the LAMP FUNCTION button SOUNDER Button selects the next mode in sequence. The associated LED shows the mode selected as Switch the sounder on or off using the ‘’SOUND’...