Page 3
3. ‘Ready’ Indicator Dimensions L=450mm 4. Flash Power Control W=145mm 5. Test/Open Flash H=145mm 6. Modelling Power Control Weight 4.5Kg Due to our policy of constant product improvement Bowens International reserve the right to change equipment specifications without notice. Fig.2...
Page 5
1. General • Welcome to the world-wide family of Bowens flash equipment users, and Switch the unit ON and set the Sounder, Photo-cell and Modelling Light switches as required. Set the Flash Power and Modelling Light Power controls to the required level.
Page 7
Esprit 2 1000 230V Operating Instructions. Esprit 2 1000 230V Operating Instructions. 7. Flash Power Selection 13. Fitting / Removing A Reflector • The flash power output is variable over five f-stops from full to one thirty-second (1/32) • A range of reflectors is available for the Esprit 2 1000 unit. To fit, slide the neck of the power.