Page 3
• Care must be exercised when handling equipment that has been in use. The reflector and front end of the unit can become Very Hot. • Due to the high voltage/high energy used in the Esprit 1500, servicing must be carried out by a qualified, authorised Service Centre.
‘ON’, with the switch illuminated, and 0 turns the unit ‘OFF’. When the unit has charged to the level set by the Flash Power Control (Fig.2) the green ‘Ready’ Indicator (Fig.2) will light. Your Esprit 1500 is now ready to fire.
Page 5
Always switch OFF the Esprit 1500 before changing the fuse or lamp. Fitting / Removing A Reflector A range of reflectors is available for the Esprit 1500. To fit, slide the neck of the reflector over the front of the unit. Align the three pegs on the reflector with the three slots in the retaining ring, press down and turn clockwise to lock.
Bowens Esprit 1500 Operating Instructions. Replacing the Flashtube Warning High Voltage Do not touch the flashtube assembly for thirty minutes after disconnecting from supply. Switch off the unit, disconnect from the mains supply and then wait thirty minutes before touching / removing the flashtube.
Page 7
Clear (Uncoated) BW-2982 Frosted BW-2983 Dimensions DIA. 145 mm, LENGTH 490 mm Weight 5.0 kg (11 lb 0 oz) Due to our policy of constant product improvement Bowens International reserve the right to change equipment specifications without notice. - 7 -...