Download Print this page

AEG BAZ2-1 Installation Instructions Manual

Aeg oven shelf runner.
Hide thumbs
   

Advertisement

BAZ2-1
Oven Shelf Runner
Installation Instructions

Advertisement

   Related Manuals for AEG BAZ2-1

No related manuals

   Summary of Contents for AEG BAZ2-1

  • Page 1

    BAZ2-1 Oven Shelf Runner Installation Instructions...

  • Page 2

    Oven Shelf Runner The oven shelf runner allows the food to be removed more easily. The following parts are supplied: Oven shelf runner BAZ2-1 2 side rails with 2 oven shelf runners Grill For oven shelf runner rails...

  • Page 3

    Removing and fitting the side rails The side rails with oven shelf runners are fitted and removed in the same way as the standard side rails supplied. Removing the side rails First pull the rails off the oven wall at the front (1) and then detach them at the back (2).

  • Page 4

    Inserting the Shelf and Sheet The shelf has two guide rods on the right and left. These must always point down. Inserting the Shelf Insert the shelf so that the two guide rods face down. Insert the shelf on the oven shelf runner rails so that the two holes engage in the re- taining bolts of the oven shelf runner rails.

  • Page 5

    Warning: Only use the shelf supplied when using the telescopic shelf runners. shelf runners. Information regarding pyrolytic cleaning: Warning: The telescopic shelf runners must be removed before py- rolytic cleaning is carried out. Cleaning the Telescopic Shelf Runners The telescopic shelf runners cannot be cleaned in the dishwasher. In most cases, warm water with washing-up liquid and a soft sponge are sufficient to clean the oven accessories.

  • Page 8

    USD 14 billion in more than 150 countries around the world. AEG Hausgeräte GmbH Postfach 1036 D-90327 Nürnberg http://www.aeg.hausgeraete.de © Copyright by AEG 822 947 892-B-210303-02 Subject to change without notice...

Comments to this Manuals

Symbols: 0
Latest comments: