Conference Calling; Ending A Call; Muting A Call; Dual Tone Multi-Frequency (Dtmf) Tones - Chevrolet 2014 Cruze Owner's Manual

Conference Calling

Conference calling and three-way
calling must be supported on the
Bluetooth phone and enabled by the
wireless service carrier to work.
To start a conference while in a
current call:
1. Turn or press the MENU/
SEL knob.
2. Select Enter Number.
3. Enter the character sequence
then select Call. See Entering a
Character Sequence in
4. After the call has been placed,
turn or press the MENU/SEL
knob and choose Merge Calls.
5. To add more callers to the
conference call, repeat
Steps 1 4. The number of
callers that can be added is
limited by your wireless service
carrier.

Ending a Call

Turn or press the MENU/SEL knob
and select Hang Up.

Muting a Call

To Mute a Call
Turn or press the MENU/SEL knob
and select Mute Call.
To Cancel Mute
Turn or press the MENU/SEL knob
and select Mute Call.
Dual Tone Multi-Frequency
(DTMF) Tones
.
The in-vehicle Bluetooth system can
send numbers during a call. This is
used when calling a menu-driven
phone system.
1. Turn or press the MENU/SEL
knob and select Enter Number.
2. Enter the character sequence.
See Entering a Character
Sequence in
.
Infotainment System
Bluetooth (Voice

Recognition)

Using Voice Recognition
To use voice recognition, press
the / button on the steering
wheel. Use the commands below for
the various voice features. For
additional information, say Help
while you are in a voice
recognition menu.
Pairing
A Bluetooth-enabled cell phone
must be paired to the Bluetooth
system and then connected to the
vehicle before it can be used. See
your cell phone manufacturer's user
guide for Bluetooth functions before
pairing the cell phone. If a Bluetooth
phone is not connected, calls will be
made using OnStar Hands-Free
Calling, if available. See
.
7-23