AOpen AOI-906 User Manual page 55

Type
Public Port
Comment
Add Virtual Server
Remove Virtual Server
Click <Apply> at the bottom of the screen to save the above configurations. You can now
configure other advance sec tions or start using the router (with the advance settings in place)
Select the port number prot ocol type (TCP, UDP or both). If you
are unsure, then leave it to the default both protocol.
Enter (service/Internet application)
the service
from the Internet that will be re-directed to the above Private IP
address host in your LA N
Note: Virtual Server function will have priority over the DMZ
function if there is a conflict between the Virtual Server and the
DMZ settings.
The description of this setting.
Fill in the "Private IP", "Private Port", "Type", "Public
Port" and "Comment" of the setting to be added and then
click "Add". Then this Virtual Server setting will be added
into the "Current Virtual Server Table" below. If you find
any typo before adding it and want to retype again , just
click "Clear" and the fields will be cleared.
If you want to remove some Virtual Server settings from
the " Current Virtual Server Table", select the Virtual
Server settings you want to remove in the table and then
click "Delete Selected". If you want remove all Virtual
Server settings from the table, just click "Delete All" button.
Click "Reset" will clear your current selections.
55
port number