Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for AEG FAVORIT 44850
Summary of Contents for AEG FAVORIT 44850
- Page 1 FAVORIT 44850 Dishwasher User information PERFEKT IN FORM UND FUNKTION...
- Page 2 Dear customer, Please read this User Information carefully and keep it to refer to at a later date. Pass it on to any subsequent owner of the appliance. The following symbols are used in the text: Safety instructions Warning! Notes that concern your personal safety. Attention! Notes that show how to avoid damage to the appliance.
-
Page 3: Table Of Contents
Contents CONTENTS Operating instructions Safety Appliance features Control panel Prior to using for the first time Setting the water softener Adding special salt Adding rinse aid Activating/deactivating the inflow of rinse aid In daily use Loading cutlery and dishes Adjusting the height of the upper basket Adding detergent Using 3 in 1 detergent tablets Selecting the programme (Programme Table) -
Page 4: Operating Instructions
Operating instructions OPERATING INSTRUCTIONS Safety Prior to using for the first time • Follow the ”Instructions for installation and connection”. Correct use • The dishwasher is only meant for washing domestic dishes. • Additions or modifications to the dishwasher are not permitted. •... -
Page 5: Appliance Features
Operating instructions Appliance features Upper spray arm Water hardness switch Lower spray arm Container for special salt Filters Dispenser for Dispenser for detergent rinse aid Rating plate IN156 Control panel Select 3 in 1 function Programme Multidisplay buttons Set start ON / OFF delay button... - Page 6 Operating instructions The ON/OFF button is used to turn the dishwasher on and off. The Programme buttons are used to select the desired dishwashing cycle. Function buttons: In addition to the dishwashing cycle and/or start delay selected, the following functions can also be set with the help of these buttons: Function button 1 Set the water softener...
-
Page 7: Prior To Using For The First Time
Operating instructions Prior to using for the first time 1. Set the water softener 2. Fill up with special salt for water softener 3. Fill up with rinse aid If you use 3 in 1 detergent, do the following: – Switch on the dishwasher, press the 3 in 1 button. The indicator lamp illuminates, the 3 in 1 function is selected. - Page 8 Operating instructions Setting electronically: 1. Press the ON/OFF button. If indicators other than the ON/OFF button are lit, a programme has been selected. The programme must be cancelled: Press function buttons 2 and 3 simultaneously for approx. 2 seconds. All other indicators will go out. 2.
-
Page 9: Adding Special Salt
Operating instructions Adding special salt Only use special salt suitable for domestic dishwashers. If you don’t use 3 in 1 detergent add special salt: - Before using the dishwasher for the first time. - When the indicator for special salt is illuminated on the control panel. 1. -
Page 10: Adding Rinse Aid
Operating instructions Adding rinse aid With rinse aid the rinsing water drains away better and so you get smear-free, gleaming dishes and clear glasses. Only use special rinse aid for dishwashers and no other liquid detergents. If you don’t use 3 in 1 detergent add rinse aid: - Before using the dishwasher for the first time. -
Page 11: Activating/Deactivating The Inflow Of Rinse Aid
Operating instructions Setting the amount of rinse aid required Only change the amount dispensed, if smears, milky spots or dried on water spots can be seen on glasses and dishes. (See section “If wash results are not satisfactory”). The dosage can be set from 1-6. The dosage is set to “4”... -
Page 12: In Daily Use
Operating instructions In daily use Loading cutlery and dishes Sponges, cleaning cloths and any other objects that can absorb water must not be washed in the dishwasher. Plastic and Teflon-coated dishes tend to retain water droplets. These dishes therefore do not dry as well as china and stainless steel. -
Page 13: Cutlery Basket
Operating instructions Cutlery basket Place knives, forks and spoons in the cutlery basket with their handles pointing downwards. Arrange cutlery loosely and distribute it in all compartments so that each individual article has good contact with washing water. Also do not arrange spoons and forks with their dirty side in contact with each other. -
Page 14: The Lower Basket
Operating instructions The lower basket Load larger and heavily soiled dishes in the lower basket. To make it easier to load larger dishes, the rear plate rests in the lower basket can be folded down. UI92 UI12 The upper basket The upper basket is designed for plates (dessert plates, saucers, dinner plates up to 24 cm in diameter), salad bowls, cups and glasses;... -
Page 15: Adjusting The Height Of The Upper Basket
Operating instructions Before closing the door, ensure that the spray arms can rotate freely. Adjusting the height of the upper basket If washing very large plates you can load them in the lower basket after moving the upper basket to the higher position. Maximum height of the dishes in: upper basket lower basket... -
Page 16: Adding Detergent
Operating instructions Adding detergent The detergent must be added before the programme starts. Only use dishwasher detergent. Follow the manufacturer’s instructions with regard to dosing and storage. The detergent compartment is located on the inside of the door. 1. If the lid is closed: Press the release button. -
Page 17: Using 3 In 1 Detergent Tablets
Operating instructions Detergent tablets Detergent tablets of different brands dissolve at different speeds. For this reason some detergent tablets cannot dissolve and develop their full cleaning power during short programmes. Therefore please use long programmes when using detergent tablets, to ensure the complete removal of detergent residuals. -
Page 18: Selecting The Programme (Programme Table)
Operating instructions Selecting the programme (Programme Table) Programme Consumption sequence values Suitable Type of Cycle soiling 0,80 AUTOMATIC Dinner service normally soiled, • • • • • (50°-65°) and cookware dried-on food remains 1,20 0,70 Dishes excluding just used, lightly to - •... -
Page 19: Starting A Programme
Operating instructions Starting a programme 1. Check that the dishes and cutlery are stacked in the dishwasher in such a way that the spray arms are free to rotate. 2. Turn on the tap fully. 3. Close the door 4. Press the ON/OFF button. 5. -
Page 20: Setting Or Changing The Start Delay
Operating instructions Setting or changing the Start Delay Using the start delay timer you can adjust when within the next 19 hours the programme is to begin. Setting the start delay: 1. Press the ON/OFF button. 2. Continue pressing the start delay button until the number of hours until the programme is to start is flashing in the multidisplay. -
Page 21: Switching Off The Dishwasher
Operating instructions Switching off the dishwasher Only switch the dishwasher off when the multi-display indicates “0” for the remaining programme time. With some programmes, the drying fan continues to run even after the end of the programme. 1. Press the ON/OFF button. All display indicators will go out. 2. -
Page 22: Care And Cleaning
Operating instructions Care and cleaning Do not use furniture care products or aggressive cleaners. • When necessary, clean the dishwasher’s controls with a soft cloth and clean warm water only. • Occasionally check the internal dispensers, door seal, and water inlet for soiling, and clean them if necessary. -
Page 23: What To Do When
Operating instructions What to do when... Remedying minor faults If one of the following fault codes is displayed in the multi-display during operation: - Fault code (Problems with water inflow), - Fault code (Problems with water outflow), please have a look at the following table. When the fault is remedied, close the dishwasher if necessary, press the button for the programme that has started. - Page 24 Operating instructions Malfunction Possible cause Remedy The siphon is blocked. Clean out siphon. The indicator for the selected programme is flashing; error code The water drain hose is displayed in the has not been correctly Check hose installation. multi-display. laid. Fault code Turn off the tap and contact The leak prevention system...
-
Page 25: The Wash Result Is Not Satisfactory
Operating instructions ..the wash result is not satisfactory. The dishes are still dirty. • The wrong programme was selected. • The dishes were loaded is such a way that the wash water did not reach all items. The baskets for the dishes must not be overloaded. •... -
Page 26: Technical Data
Operating instructions Disposal Packaging material All the packaging materials used are harmless to the environment and can be recycled. Plastics are marked, e. g. >PE<, >PS< etc. Use these marking to dispose of the packaging material in the right containers at your local recycling centre. -
Page 27: Notes For Test Institutes
Operating instructions Notes for Test Institutes Testing in accordance with EN 60704 must be carried out with the appliance fully loaded and using the test cycle (see “Programme Table”). Tests in accordance with EN 50242 must be carried out when the salt dispenser in the water softener and the rinse aid dispenser have been filled with salt and rinse aid respectively, and using the test programme (see“Programme Table”). -
Page 28: Installation And Connection Instructions
Installation and connection instructions INSTALLATION AND CONNECTION INSTRUCTIONS Safety information for the installation • Only transport the dishwasher in an upright position, otherwise salt water may run out. • Before using the dishwasher for the first time, check for any damage caused in transport. -
Page 29: Fitting Under A Counter
Installation and connection instructions Fitting under a counter (kitchen worktop or sink) By removing the machine’s worktop, you can install it under a close fitting sink unit or a pre-existing top, providing the dimensions of the recess correspond to those shown in the picture. IN04 Proceed as follows: Remove the machine’s worktop by unscrewing the two rear retaining... -
Page 30: Connecting The Dishwasher
Installation and connection instructions Connecting the dishwasher Connecting to the water supply • The dishwasher can be connected to cold and hot water supplies up to max. 60°C. • The dishwasher must not be connected to open hot water appliances or instantaneous water heaters. -
Page 31: Water Outlet Hose Connection
Installation and connection instructions Water outlet hose connection The end of the drain hose can be connected in the following ways: 1. To the sink outlet spigot, securing it to the underside of the work surface. This will prevent waste water from the sink running into the machine. -
Page 32: Electrical Connection
Installation and connection instructions Anti-flood system For protection from water demage, the dishwasher is equipped with a anti-flood sytem. In the event of a fault, the safety valve in the water inlet hose immediately interrupts the supply of water to the appliance. Electrical connection Details about the voltage, type of supply and the fuses required are to be found on the rating plate. -
Page 33: Service
Service Service If after all these checks, the problem persists, contact your local consumer services department, quoting the model (Mod.), product number (PNC) and serial number (S.N.). This information can be found on the rating plate located on the hand side of the dishwasher door (see picture). - Page 36 14 billion USD in more than 150 countries around the world. AEG Hausgeräte GmbH Postfach 1036 D-90327 Nürnberg http://www.aeg.hausgeraete.de © Copyright by AEG 152 966 38/0 Subject to change without notice...