AEG FAVORIT 44850 User Information page 8

Operating instructions
Setting electronically:
1. Press the ON/OFF button.
If indicators other than the ON/OFF button are lit, a programme
has been selected. The programme must be cancelled:
Press function buttons 2 and 3 simultaneously for approx. 2 seconds.
All other indicators will go out.
2. Press function buttons 2 and 3 simultaneously and keep them
pressed. The LED indicators for function buttons 1 to 3 will flash.
3. Press function button 1.
The LED indicator for function button 1 will flash.
The multi-display will indicate the hardness setting.
4. Pressing function button 1 increases the hardness setting by 1.
(Exception: hardness setting 1 follows hardness setting 10).
5. When the hardness setting is correct, press the ON/OFF button.
The hardness setting is now saved.
If the water softener is set electronically to "1", this switches off the
control indicator for special salt.
Water hardness
in °d 1
51 - 70
43 - 50
37 - 42
29 - 36
23 - 28
19 - 22
15 - 18
11 - 14
4 - 10
unter 4
1) (°d) German degree, measure of water hardness
2) (mmol/l) millimol per litre, international unit for water hardness
*) factory setting
8
in mmol/l 2
Range
9,0 - 12,5
7,6 - 8,9
6,5 - 7,5 IV
5,1 - 6,4
4,0 - 5,0
3,3 - 3,9
III
2,6 - 3,2
1,9 - 2,5 II
0,7 - 1,8 I/II
unter 0,7 I
Adjusting the hardness
setting
Manual Electronic
10
9
8
*2
7
6
5
4*
3
1 2
1
no salt
necessary
Indication on
the
multidisplay