Nfc; S Beam - Samsung Galaxy S4 User Manual

• L2TP/IPSec PSK (Layer 2 Tunneling Protocol / Internet
Protocol Security Pre-Shared Key)
• L2TP/IPSec RSA
• IPSec Xauth PSK
• IPSec Xauth RSA
• IPSec Hybrid RSA
7. Enter the Server address and any other required fields
that are dependent upon the Type you entered
previously.
8. Tap the Show advanced options check box to display
additional VPN options.
9. Tap Save to save your VPN settings.
Adding an IPsec VPN
1. Before using VPN, you must first set up a screen unlock
PIN or password. For more information, refer to
"Security" on page 129.
2. From the Home screen, tap
Connections➔ More settings ➔ VPN.
3. Tap Advanced IPsec VPN.
4. Tap Add VPN connection.
5. Enter a password and tap OK.
104
➔ Settings ➔
6. Enter a name for the VPN connection in the VPN
connection name field.
7. Select an IPsec type from the drop-down menu.
8. Enter any other required information.
9. Tap the Show advanced options check box to display
additional VPN options.
10. Tap Save to save your VPN settings.

NFC

NFC (Near Field Communication) allows data exchange when
you touch your device with another compatible device. This is
used for applications such as S Beam.
To activate NFC, follow these steps:
1. From the Home screen, tap
Connections ➔ NFC.
2. Tap the ON/OFF slider, located to the right of the NFC
field, to turn NFC ON

S Beam

When S Beam is activated, you can beam files to another
NFC-capable device by holding the devices close together.
You can beam images and videos from your Gallery, music
files from your Music Player, and more.
➔ Settings ➔
.