Power Wheels F-150 Owner's Manual With Assembly Instructions page 12

Raptor svt
Table of Contents

Advertisement

Screws
16
• Insert four screws into the grille support and tighten.
17
• Align the pegs on the underside of the grille support
with the posts on the vehicle.
• Insert two screws into the grille support and tighten.
Rear Wheel
18
BOTTOM SIDE VIEW
• Slide a rear wheel onto the rear axle.
Hint: Note the number on the inside of the wheel and on
the bottom of the vehicle near the rear axle. The rear
wheel with a 1 should match the 1 on the vehicle and the
rear wheel with a 2 should match the 2 on the vehicle.
W1070pr-0920
ASSEMBLY
Screws
2
Rear Axle
19
• Position the wire clip so that the wavy side is out.
• Insert the straight side of the clip through the hole in
the axle.
20
• Slide the clip so that the straight end goes through the
other hole in the axle.
• Make sure the straight end of the clip is through both
holes in the axle.
12

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

F-150 raptor svt w1070

Table of Contents