AEG FAVORIT 44080 IL Instruction Book page 10

152959 74/0en 18-11-2005
Operating instructions
NOTE: If the drying results are not satisfactory we suggest that you
activate the rinse aid dispenser.
The activation/deactivation of the rinse aid dispenser can only be
possible with the 3 in 1 function active.
Activation/deactivation of the rinse aid dispenser
(The dishwasher must be switched off)
When the rinse aid dispenser has been activated, the rinse aid
indicator light on the control panel is automatically activated.
1. Press the On/Off button. All programme selection buttons indicator
lights will illuminate (setting mode).
If only one programme selection button indicator light is
illuminated, this means that a washing programme is set.
The programme must be cancelled: press simultaneously function
buttons 2 and 3 for about 2 seconds, the indicator light of the set
programme button starts flashing.
After about 2 seconds the indicator lights of all the programme
selection buttons will illuminate indicating that the set programme
has been cancelled and that the machine is now in setting mode.
2. Press simultaneously function buttons 2 and 3, the indicator
lights of the function buttons 1, 2 and 3 start flashing.
3. Press function button 2, the indicator lights of function buttons 1
and 3 turn off while the indicator light of the function button 2
goes on flashing.
4. To activate the rinse aid dispenser, press again function button 2,
the indicator light End of programme illuminates, indicating that
the rinse aid dispenser has been activated.
5. To memorise the operation, switch off the dishwasher by pressing
the On/Off button or wait about 60 seconds after which the
dishwasher will automatically return to setting mode.
To deactivate again the rinse aid dispenser simply follow the above
operations until the indicator light End of programme turns off.
10
13:01 Pagina 10