Installing The Gigaset Hc450 Door Intercom System; Pack Contents; Mounting The Hc450 Door Intercom - Gigaset HC450 User Manual

Installing the
Gigaset HC450 door
intercom system
Installation of the HC450 door intercom
system does not require additional cables
to be laid if a doorbell with sound effect is
already present. You replace the existing
doorbell key in this case.
Begin by checking that you have all the
components required for mounting.
Please read the entire chapter on instal-
lation carefully before you commence.

Pack contents

u
1 control unit with cover
u
4 plugs and mounting screws for fixing
the control unit and door intercom
u
1 HC450 door intercom
u
1 frame for surface mounting
u
1 plug-in power supply unit
u
2 hexagon socket screws for fixing the
door intercom to the frame
u
1 Allen key for the hexagon socket
screws
u
2 clamping plugs for connecting the
cables to the door intercom
u
2 doorbell key covers and nameplates
u
2 thermal shrinkage tubes

Installing the Gigaset HC450 door intercom system

Mounting the HC450
door intercom
The HC450 door intercom generally
replaces the existing doorbell. It is suitable
for mounting outdoors and features
weatherproof protection.
Loudspeaker
Top key
Bottom key
Microphone
u
Make sure that there are no power sup-
ply lines, cables or the like near the
mounting location.
u
Select the attachment and mounting
location so that there is a minimum dis-
tance of 10 cm between the micro-
phone and the closest wall surface.
min. 10 cm
min. 10 cm
7