Table of Contents
Advertisement
Use
1. Tap your foot lightly on the centre of
the scale until "HI" appears on the
LCD display.
2. Stand with both feet on the scale on-
ce "0.0" appears on the LCD display.
Stand calmly and without shifting
your weight.
3. During weighing, the "kg/lb" LCD di-
splay flashes and the displayed value
rises until your weight has been de-
termined.
4. The "kg/lb" display now stops flas-
hing and your weight is displayed in
grades of 0.1 kg/0.2 lb.
Attention: never jump on to the scale as
this may cause damage.
Warning Displays
"O_Ld" appears in the LCD display if the
weight exceeds the maximum weighing
capacity of 180 kg/396 lb. Step off the
scale immediately as you may otherwise
cause damage.
Replace the batteries if "Lo" appears in
the display.
The scale is unable to measure the
weight if "Err" appears in the display.
Step off the scale in this case, wait for a
few seconds and then try again. Make
sure you stand calmly and do not inter-
rupt the weighing process.
- 6 -
Advertisement
Table of Contents
