650_UM_GB_25-08-08
25/08/08
8.7.2
Backlight
Screen
•
It allows you to reduce brightness for better
performance of batteries and save power during
periods of expected inactivity.
Keypad
•
You may customise your keypad light by selecting
On/Off when activated.
8.7.3
Languages
(1)
Display language for messages (select using
selects the language according to the home network (if available).
8.7.4
Dictionary
You have a dictionary to which you can add your own words in addition
to those suggested by the predictive input system.When you consult your
dictionary, you can add, modify or erase words by using the "Options"
softkey.
8.7.5
Input mode
(2)
Please see chapter "Latin input mode", page 67. In addition to the specific
characters table for Cyrillic, Chinese, other data input modes are also
available in your telephone. This feature allows you to write short
messages and add names with special characters to your directory.
8.7.6
Security
Activate PIN
•
The SIM card protection code is requested each
time as the phone is powered on if this code is
activated.
(1)
Contact your network operator to check service availability.
(2)
Depending on the language.
43
12:17
Page 43
).The "Automatic" option
Change PIN
•
Change PIN code.
Change PIN2
•
A protection code for certain SIM card features
(Billing/Cost/FDN, etc.) will be requested if you
attempt to access it, if the code is activated. Select
to update it with a new one (between 4 and 8
digits).
Activate phone
•
It is requested each time as the phone is powered
code
on if this code is activated.
Change phone
•
Change phone password, its initial one is 1234.
code
Fixed dialed
•
It allows the phone to be "locked" so that it can only
number
dial certain numbers, or numbers with certain
prefixes. To activate this function, PIN2 code is
mandatory.
8.7.7
Networks
Network selection
•
Preferred
•
List of networks to which you wish to be connected
networks
in order of priority (update this list using
•
Select network
•
The choice of the network connection is left up to
the user.
•
Search mode
•
Network connection switching between "Manual"
and "Automatic".
GPRS connection
(1)
•
When needed
•
GPRS mode active depending on connection
requirements.
•
Always
•
GPRS mode continuously active.
(1)
Depending on network availability.
44
).