Advertisement

Quick Links

Selecting Picture Mode

Selecting Picture
Mode
• Select the Picture mode
that is appropriate
depending on the kinds
of pictures, you enjoy.
44
1
Selecting Picture Mode
• Press the [PICTURE MODE] on the
remote control.
• While pressing the [PICTURE MODE] for
the first time, the current picture mode will
be displayed.
Each Press of the Button Will Select
2
One of Four Picture Modes.
Normal
* Normal :
* Dynamic: For a clear-cut image emphasizing high contrast
* Cinema:
* User:
3
Menu on the Screen will disappear.
• After selecting a desired picture mode, the
menu on the screen will be disappeared.
• If you want to customise the picture mode,
refer to the following page.
NOTES:
1) Normal, Dynamic, and Cinema modes are factory preset values.
2) When adjusting sub-menus while you are in Normal, Dynamic,
and Cinema modes, the Picture Mode will be automatically
converted to User Mode, and the adjustments will be made.
3) Selecting [Initialize] in the [Features], menu will allow the
Brightness, Contrast, etc. to return to the factory preset values.
• Each time you press the button, a
different picture mode appears. The
sequence used is as follows:
Dynamic
Cinema
For a highly defined image in a normally bright
room
for sports viewing
For a movie
Allows the user to customise settings as desired.
User

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DPX-32X1BMB and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Daewoo DPX-32X1BMB

  • Page 1: Selecting Picture Mode

    Selecting Picture Mode Selecting Picture Mode Selecting Picture • Press the [PICTURE MODE] on the Mode remote control. • While pressing the [PICTURE MODE] for • Select the Picture mode the first time, the current picture mode will that is appropriate be displayed.
  • Page 2: Customising Picture

    Customising Picture Press the MENU Button. Customising • The MENU shown below will display on the screen. Picture Mode Normal • You can adjust the Brightness Picture color tone and Contrast Sound Sharpness brightness to your Color Screen preference. Tint Color Temp.
  • Page 3: The Remote Control

    Select User Mode Adjustments • While you are in [Picture Mode – User], press the buttons to select a specific adjustment item. “ ” Mode User Brightness Picture Contrast Sound Sharpness Color Screen Tint Color Temp. Normal Feature N.R. Install Move Adjust Exit...
  • Page 4: Adjusting Screen

    Adjusting Screen Press the SCREEN SIZE Button. Adjusting with Screen Size button • The current screen size will be displayed on the screen. • Each time you press the SCREEN SIZE button on the • You can adjust remote control, a different screen size appears. The screen size or sequence used is as follows in case of AV and TV modes : aspect ratio as...
  • Page 5 Adjusting Screen in the MENU Press the MENU Button. Adjusting Screen • The MENU screen as shown below will appear. Mode Normal • You can adjust the Brightness Picture screen in the menu. Contrast Sound Sharpness Color Screen Tint Color Temp. Normal Feature N.R.
  • Page 6 Adjusting Screen in the MENU Screen Mode Function This function is same to the [Screen Size] of Press the Volume “ VOL ” Buttons. remote controller. • Press the Volume “ VOL ” buttons to enter the sub menu “Screen”. •...
  • Page 7: Watching A Still Image

    Watching a STILL Image Press the “STILL” Button. Watching a • If you wish to freeze a picture, press the “STILL” button. Still Image You can still hear the sound. • Press “STILL” button again to cancel the “STILL” function. •...
  • Page 8: Watching Two Pictures Simultaneously

    Watching Two Pictures Simultaneously • PIP (Picture-in-Picture) and P-by-P(Picture-by-Picture) modes allow users to watch two pictures simultaneously. Engaging PIP mode Screen Adjustment • Press the ‘PIP’ button once on the remote control to engage of the Sub-picture the Picture-in-Picture mode. •...
  • Page 9: Select The Channel

    Watching Two Pictures Simultaneously Select the Channel • Using channel Up/Down buttons ( , you may select the desired channels for sub-pictures. • The CH Up/Down buttons select the TV channels. Select the Input Source • Various signal sources can be displayed within the sub-picture under PIP mode.
  • Page 10: Selecting Sound Mode

    Selecting Sound Mode Select “SOUND MODE”. Selecting • Press the “SOUND MODE” on the Sound Mode remote control. • While pressing the “SOUND MODE” • Enjoy various sound for the first time, the current sound modes by selecting mode will be displayed. your favourite Sound Mode depending on the kinds of moving...
  • Page 11: Customising Sound Mode

    Customising Sound Mode Press the MENU Button. Customising • The MENU screen as below will be displayed. Sound Mode Mode Normal • This feature allows Brightness Picture the user to adjust for Contrast Sound Sharpness their preference. Color Screen Tint Color Temp.
  • Page 12 Select the Effect Mode. MTS Function • Select [Effect] by pressing the buttons, “ ” then select the desire sound effect by pressing the “ VOL ” button. If a channel is • [Effect]: Used to emphasize stereo effect. received in two •...
  • Page 13 Customising Sound Mode Select the Sound Mode. • Select the Sound Mode by pressing the buttons, “ ” then adjust it by pressing the “ VOL ” buttons. Balance Effect Picture Mode Normal Sound Equalizer Screen Feature Install Exit Move Adjust MENU Normal...
  • Page 14: Selecting Input Signal

    Selecting INPUT SIGNAL Press the Input Signal Selecting Button. INPUT SIGNAL • Press the [TV], [AV] and [MULTIMEDIA] button on the remote control, or select the desire input signal • Used to select using Keypad of the PDP unit. INPUT signal of external device •...
  • Page 15: Checking The Current Input Signal

    Checking the Current Input Signal - Press the [DISPLAY] button on the remote control, then displays basic informations of the current input signal, Under this state, pressing the [DISPLAY] button once more, additional informations about the current input signal will be displayed on the OSD. Press the DISPLAY Button.
  • Page 16: Menu Background, Language And Child Lock Setting

    MENU Background, Language and Child Lock Setting Press the MENU Button. Selecting • The MENU screen will be displayed as below. Languages Mode Normal • Used to select the Brightness Picture tanslucent level of Contrast Sound Sharpness MENU background Color Screen and language used Tint...
  • Page 17 MENU Background, Language and Child Lock Setting “ CH ” Select LANGUAGE by using the Button. • Select [Language] by using the button. “ ” • Every press of the “ ” button while you are in the [Language] mode would cycle through the different languages.
  • Page 18 MGDI plus (Meta Genuine Digital Image plus) MGDI plus is the image enhancement technology of Daewoo Electronics, which provides more clear, realistic, and delicate images. Press the MENU Button. MGDI plus • The MENU screen will be displayed as below.
  • Page 19 Auto Power Setting Auto Power Setting POWER/STANDBY button • Select the [Auto Power] by pressing the “ ” Indicator from [Feature]. • You can select [Auto Power] ON and OFF mode by using Front panel LED lights the “ ” button. •...
  • Page 20: Closed Caption Setting

    Closed Caption Setting Closed Caption Setting • Press the “CAPTION” button on the Remote Control. • Whenever pressing the “CAPTION” button, caption mode is changed as follow. O ff Closed Caption Setting in the Menu. • Press the Menu Button. •...
  • Page 21: Select Features

    Closed Caption Setting Select Features Caption Box Setting • Select [Features] by pressing the “ ” button. • Black : Background of Background English Language Picture the caption box is Child Lock MGDI plus black. Sound Auto Power • Transparent : Closed Caption Screen Time Setting...
  • Page 22: Time Setting

    Time Setting Press the MENU Button. • The MENU screen will be displayed as below. Mode Normal Brightness Picture Contrast Sound Sharpness Color Screen Tint Color Temp. Normal Feature N.R. Install Exit Move Select MENU Select Feature • Select [Feature] by the “...
  • Page 23 Time Setting Off-Time and Wake time setting Time Setting • Select Functions by pressing the “ ” button. First, set [Clock]- current time, and then You can • The “Current time” setup off-time and wake time. must be set up ahead •...
  • Page 24: Image Sticking Minimisation(Ism)

    Image Sticking Minimisation(ISM) Press the MENU Button. • The MENU screen will be displayed as below. Mode Normal Brightness Picture Contrast • Image Sticking Sound Sharpness Color Minimisation Screen Tint • Displaying a still image Color Temp. Normal Feature N.R. for a long time causes part image sticking on Install...
  • Page 25 Image Sticking Minimisation(ISM) Select Functions. • Every press of the “ ” button after select function by the “ ” button would switch between ON/OFF. Pixel Shift Picture Low Bright Image Invert Sound Screen Feature Install Move Adjust Exit MENU NOTES: Pixel Shift : The whole screen shifts up/down, left/right at 15 sec interval to minimize...
  • Page 26: Initialize Setting

    Initialize Setting Press the MENU Button. Back to Initialization • The MENU screen will be displayed as below. Mode Normal • You can restore the Brightness Picture values of the adjustment Contrast Sound Sharpness setting made in the Color MENU back to factory Screen Tint settings.
  • Page 27 Initialize Setting INITIALISATION • Enter the sub Menu by using the “ ” button. • Select the [Initialize] by pressing the “ ” button, then press the “ ” button. • A confirmation message will be displayed. • To perform initialization, press the “ ”...
  • Page 28: Setting Sleep Timer

    Setting Sleep Timer Press the “SLEEP” Button. Setting • Press the “SLEEP” button on the Remote Control. Sleep Timer • Pressing the “SLEEP” button first time will display the current setting for Sleep Timer. • Sleep Timer turns • To cancel the Sleep Timer, press the “SLEEP” button to the PDP off after a select ‘Off’.
  • Page 29: Before Requesting Service

    Before Requesting Service Before requesting for service, check the following points once again. • Remote control does not • The Display makes a snapping • There are empty spots at the top function properly. sound. and the bottom area of the screen. •...
  • Page 30: Display Unit

    ¨ fi ˛ ¿ SPECIFICATIONS DISPLAY UNIT Diagonal Size Screen Aspect Ratio 16 : 9 System NTSC M, PAL M/N Display Resolution 852(H) 480(V) dots Pixel Pitch 1.08(H) 1.08(V) mm Dimension Without Stand : 1052 x 715.5 x 85 (W X H X D) mm With Stand : 1052 x 770.5 x 308.2 (W x H x D) mm Weight...

Table of Contents