Table of Contents
Advertisement
Available languages
Available languages
Chapter 2: Getting started
Slice is ready to go, right out of the box. Simply plug it in, connect your media
player, switch it on and adjust the focus and volume.
Projector will only turn on when it is flipped out.
Power
Slice can be powered on and controlled from the unit itself as well as from the
battery-operated remote controller.
Remote controller battery
A button cell battery (CR-2025, 3V) is already inserted into the battery
compartment. Remove the paper strip to activate it.
Plugging in
1.
Connect one end of the power cord to Slice.
2.
Install the correct wall plug into the AC/DC adapter
3.
Plug the AC/DC adapter into a wall power source.
4.
The power indicator will turn yellow and Slice will be in standby mode.
Power status
1.
The power button will display one of the following:
A.
Red — Power ON
B.
Yellow — Power OFF (standby mode)
Other buttons in front of unit also display red when Slice is turned ON.
8
Advertisement
Table of Contents
