Table of Contents
Advertisement
Storing Position in Memory
D Memory button
E Position buttons "1", "2"
and "3"
After the seat and head restraint are
positioned, push memory button D,
release, and within 3 seconds push
position button "1". Two additional sets
of positions may be stored into memory
using position buttons "2" and "3".
Using the same position button, the
steering column position and rear view
mirror positions will also be stored
together with the seat position.
Adjusting steering column see page 39
and mirror see page 56.
Recalling Stored Positions
Press position button "1", "2" or "3"
and hold until seat/head restraint/
steering wheel/mirror movement has
stopped.
Note:
For safety reasons, the seat/head
restraint/steering wheel/mirror
movement stops after releasing the
position button.
35
Advertisement
Table of Contents
