Table of Contents
Advertisement
92
Troubleshooting
Video problems ...
Problem
Video is
unstable or
only black and
white
There is no
video or audio
Video
recording
stops
unexpectedly
Suggested solution
Check that you are using the correct broadcast standard
format:
•
See Broadcast Standard in
page 15. For proper operation, you must specify your
country in the TV Channels Initialization Wizard (see
).
page 7
•
Check the quality of your incoming TV signal on another
receiver; bad reception may be the cause.
•
Try connecting your tuner directly to the cable TV or
antenna source. Too many splitters in the cable will
degrade the signal.
•
Ensure that your cable or antenna is connected.
•
Ensure that the video connector is set to the correct
source (see Connector in
page 15).
•
Check that the audio and video connectors are securely
plugged into the correct jacks.
•
Check that your video card is securely seated in its slot.
Please refer to the user guide for the card location.
•
Video files are typically very large; ensure that you have
sufficient disk space.
•
Ensure that you are recording to the correct hard disk
— click the Disk Space Settings button in Personal
Video Recorder settings (see
settings
on page 35).
•
Disable screen savers while recording.
•
Disable Power management while recording.
TV video settings
TV video settings
Personal Video Recorder
on
on
Advertisement
Table of Contents
