Installing - CRS SAM52M User Manual

Installing

Note: SAM52M Software can also be downloaded from www.crs-usa.com.
Note: The Sam52M software can be used as Save/Load software with out installing the
software key. To edit any programming as described in this manual you will need to install
the USB or LPT key on the appropriate port on your PC.
1. Load the SAM52M program CD into your CD drive.
2. From the Windows Desktop, choose the My Computer icon.
3. Select your CD ROM drive (usually drive "D".)
4. Choose Setup, the Welcome dialog displays.
5. Click Next, the Ready to Install dialog displays.
6. Click Next, the Install Directory dialog displays.
7. Click Next, the Select Shortcut Folder dialog displays.
8. Click Next. When all files are copied, the Finished dialog displays.
9. Click Finish.
10. Click OK to restart your PC.
11. Remove the CD from the drive, your installation is complete.
2 • Introduction
SAM52 User's Manual v2.3