Table of Contents
Advertisement
Alignment and Adjustments
5-10 Microwave Heat Distribution - Heat Evenness
The microwave heat distribution can be checked indirectly by measuring the water temperature rise at
certain positions in the oven:
1. Prepare five beakers made of 'Pyrex', having 100 milliliters capacity each.
2. Measure exactly 100milliliters off water load with a measuring cylinder, and pour into each beaker.
3. Measure the temperature of each water load. (Readings shall be taken to the first place of decimals.)
4. Put each beaker in place on the cooking tray as illustrated in figure below. Start heating.
5. After heating for 2 minutes, measure the water temperature in each beaker.
6. Microwave heat distribution rate can be calculated as follows:
Heat Distribution =
The result should exceed 65%.
5-4
Minimum
Temperature Rise
X 100(%)
Maximum
Temperature Rise
D
D
D/4
D/4
D/4
Cooking Tray
Samsung Electronics
Beaker
D/4
Hide quick links:
Advertisement
Table of Contents
