Table of Contents
Advertisement
Parallel Port Mode
SPP
Using Parallel port as Standard Parallel Port. (Default value)
EPP
Using Parallel port as Enhanced Parallel Port.
ECP
Using Parallel port as Extended Capabilities Port.
ECP+EPP
Using Parallel port as ECP & EPP mode.
ECP Mode Use DMA
3
Set ECP Mode Use DMA to 3. (Default value)
1
Set ECP Mode Use DMA to 1.
2-4
Power Management Setup
CMOS Setup Utility-Copyright (C) 1984-2005 Award Software
ACPI Suspend Type
Soft-Of f by PWR-BTTN
PME Event Wake Up
Modem Ring On
Resume by Alarm
x Date (of Month) Alarm
x Time (hh:mm:ss) Alarm
Power On By Mouse
Power On By Keyboard
x KB Power ON Password
AC Back Function
: Move
Enter: Select
F5: Previous Values
ACPI Suspend Type
S1(POS)
Set ACPI suspend type to S1/POS(Power On Suspend). (Default value)
S3(STR)
Set ACPI suspend type to S3/STR(Suspend To RAM).
Soft-off by PWR-BTTN
Instant-off
Press power button then Power off instantly. (Default value)
Delay 4 Sec. Press power button 4 sec. to Power off. Enter suspend if button is pressed
less than 4 sec.
PME Event Wake Up
Disabled
Disable this function.
Enabled
Enable PME Event Wake up. (Default value)
Modem Ring On
Disabled
Disable Modem Ring On function.
Enabled
Enable Modem Ring On function. (Default value)
GA-8I845GVM775 Motherboard
Power Management Setup
[S1(POS)]
[Instant-of f]
[Enabled]
[Enabled]
[Disabled]
Everyday
0 : 0 : 0
[Disabled]
[Disabled]
Enter
[Soft-Off]
+/-/PU/PD: V alue
F10: Save
F6: Fail-Safe Default
- 34 -
Ite m Help
Menu Level
ESC: Exit
F1: General Help
F7: Optimized Defaults
Advertisement
Table of Contents
