Auxiliary heating and ventilation
Fig. 13 Screen information and selection of the preset time
First read and observe the introductory information given on page 19.
Opening the main menu
›
Press on in the main Climatronic menu
Auxiliary heater for vehicles with manual air conditioning.
Explanation of graphic
Next start: Day and time when the vehicle is to be ready for use
A
Set operating mode, set operating duration
B
Activated preset time - illuminated line
C
Timer - Select the preset times when the vehicle is to be ready for use
■
■
Timer 1 - Preset time 1
Timer 2 - Preset time 2
■
Timer 3 - Preset time 3
■
■
Mode - Sets the operating mode
Heating - Heating mode
■
Ventilation - Ventilation mode
■
■
Timer off - Switches off the preset time
Settings - Sets the day and time when the vehicle is to be ready for use
■
Timer 1 - Sets the preset time 1
■
■
Timer 2 - Sets the preset time 2
Timer 3 - Sets the preset time 3
■
Set running time - Sets the time frame in which to run the device (10 - 60 mi-
■
nutes)
After setting the desired time, press the button
» page 22
or press the
button →
CAR
to save the preset time.
BACK
Note
Only one preset time can be active. The activated preset time will be deactiva-
■
ted again after it has started automatically. For the next start, activate one of the
preset times.
In the selection of the day in the preset time, there is an option between Sun-
■
day and Monday without the specified day. If this setting is made, the vehicle will
be ready for use at the selected time, regardless of the current day.
The system in operation switches off on expiration of the operating duration or
■
can be deactivated by pressing the direct on/off button
remote control.
If a different time is set
» page
10, Device system setup, the activated preset
■
time is automatically deactivated. The preset time must be reactivated.
Vehicle status
First read and observe the introductory information given on page 19.
›
Press the button
→ Vehicle status.
CAR
■
Convenience consumers - Displays up to three consumers with the largest
share of fuel consumption and displays the amount of fuel required to operate
all convenience consumers
»
Vehicle Owner's Manual, chapter Driving and envi-
ronment
Tyre pressure monitoring - Starts a new calibration process for the tyre pres-
■
sure monitor
■
Start/stop status - Displays information about the status of the START-STOP
system
Details of the multifunction display
First read and observe the introductory information given on page 19.
›
Press the button
→ Driving data.
CAR
Current consumption - Activates/deactivates the current fuel consumption dis-
■
play in the instrument cluster
Travelling time - Activates/deactivates the travelling time display in the instru-
■
ment cluster
or by using the radio
23
Vehicle systems