Air-Zenith OB2 Owner's Manual

Dc 12-volt air compressor

Advertisement

AIR-ZENITH OB2 Owner's Manual
Congratulations! Thank you for purchasing the world's fastest DC 12-Volt air compressor by AIR-ZENITH.
Air-Zenith quality products are manufactured by the people who know pneumatic air suspension systems
inside and out. Our R&D people take pride in doing it right the first time, every time. This installation manual
will help guide you through the proper and safe installation of your compressor to ensure years of reliable
service. Thank you for your support!
PLEASE READ THIS MANUAL CAREFULLY BEFORE OPERATING
THIS PRODUCT.
MODELS
● AZ-OB2
PRODUCT SPECIFICATIONS
● Motor Voltage: DC 12-Volt
● Motor Class: ¾ Horsepower
● Max. Amp Draw: 35A
● Max. Working Pressure: 200 PSI
● Duty Cycle: 100% (at 200PSI & 72° F)
● Max. Ambient Air Temp.: 158° F
● Min. Ambient Start Temp: -40° F
● Thermal Protector: Yes
STANDARD FEATURES
● Oil-free design, non-lube piston & cylinder.
● Patented Interchangeable Piston Technology.
● Long-life, PTFE compound piston ring.
● Balanced connecting rod, low vibration, low sound levels.
● Direct driven motor with automatic reset thermal overload protector.
● IP55 Certified Waterproof cooling fan.
● ½-inch PTFE-lined stainless steel braided air hose with ½-inch NTP air tank fitting.
● Heavy duty anti-frozen check valve.
● Remote mountable weather proof air filter.
● 80A heavy duty relay with factory pre-wired relay socket.
● Integrated 3-position mounting brackets with NYLOCK self-locking mounting hardware.
Image shown above is a side mounted Air-Zenith OB2 BLACK (P/N: AZOB2K).

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the OB2 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Air-Zenith OB2

  • Page 1 AIR-ZENITH OB2 Owner’s Manual Congratulations! Thank you for purchasing the world’s fastest DC 12-Volt air compressor by AIR-ZENITH. Air-Zenith quality products are manufactured by the people who know pneumatic air suspension systems inside and out. Our R&D people take pride in doing it right the first time, every time. This installation manual will help guide you through the proper and safe installation of your compressor to ensure years of reliable service.
  • Page 2 Make sure that your compressor setup is properly fused. Install a 70A or larger fuse as close to the • battery positive post as possible. Note: Air-Zenith does not recommend circuit breakers, a high quality 70A or larger ANL-fuse and fuse holder is highly recommended.
  • Page 3 This compressor has a pre-installed check valve located at the cylinder head. Do not remove that • check valve; connect supplied braided air hose to the check valve, and then connect air hose to the air tank with supplied ½-inch NPT fitting. Connect compressor ground wire to vehicle chassis.
  • Page 4 Air-Zenith compressors resulting from misuse or abuse shall void this limited warranty. Any return freight charges must be prepaid by the customer. Air-Zenith shall not be liable for any damage or injury to persons or property resulting from improper installation or misuse of this product. If it is due to improper installation or misuse, a repair charge will be assessed and the customer will be contacted before work is performed or replacement parts are shipped.

This manual is also suitable for:

Az-ob2

Table of Contents