1. Manuals
  2. Brands
  3. Poise Technology Manuals
  4. Gateway
  5. AG-188
  6. User manual

Poise Technology AG-188 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
AG-188 User Manual
AG-188 User Manual
1 / 53

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AG-188 and is the answer not in the manual?

Questions and answers

Summary of Contents for Poise Technology AG-188

  • Page 1 AG-188 User Manual AG-188 User Manual 1 / 53...

  • Page 2: Table Of Contents

    Account Manage .................3 1.9.1 Phone Book: ..................3 1.9.2 2.9.3 Syslog Config: ..................3 2.9.4 Time Set: ....................3 Reboot: ....................3 2.1.1 Use normal phone to pre-configure AG-188 gateway ........3 Telnet Console ......................3 Introduce ........................3 Global Command......................3 Tree Structure .......................3 2 / 53...
  • Page 3 Restore to factory default..................3 POST Mode(safe mode) ..................3 FAQ.........................3 How many SIP servers may AG-188 register simultaneously? ........3 How can I know the AG-188’s IP address? ................3 How to use AG-188’s Lifeline function? ................3 Why the settings vanish after reboot?.................3 How to use the dial rule?.......................3...

  • Page 4: Ag-188 Features

    AG-188 User Manual 1 AG-188 Features Appearance Power: Power indicator. Server: Server indicator. Registered: ON; Registering: Blinking; Do not register: OFF. VoIP: Indicate the calling status. Hook-on: OFF; Hook-off and in VoIP state: ON; Hook-off and in PSTN state: OFF...

  • Page 5: Software

    AG-188 User Manual The network connects:2 RJ45 connect, a WAN, a LAN Software Support two sip servers running at the same time. Back-up sip server support. NAT, Firewall. DHCP client and server. Support PPPoE, (used for ADSL, cable modem connecting).

  • Page 6: Compliant Standards

    AG-188 User Manual Compliant Standards ● CE: EN55022, EN55044 ● FCC part 15 ● RoHS Operating requirement ● Operation temperature: 0 to 40° C (32° to 104° F) ● Storage temperature: -30° to 65° C (-22° to 149° F) ●...

  • Page 7: Installation

    192.168.10.x or using dynamic obtain IP. Open your web browser and key in 192.168.10.1. Then you will see the logon page of AG-188, the default username and password is admin/admin for administrator and guest/guest for guest.

  • Page 8: Web Configuration

    2 Web Configuration 1.1 Access Web setting page Enter AG-188 IP address in the web browser and press ENTER to go to the log on page, and key in the username and password to access AG-188 setting page. Default username and password is:...

  • Page 9: Current State

    VoIP： show the default protocol, the working state of SIP and IAX2, you can see whether AG-188 has registered the public sip server and IAX2 server. Phone Number shows the public sip server、 the private sip server and the IAX2 server phone numbers.
  • Page 10 ----Set local DNS server in the Preferred DNS and the Alternate DNS Configure to dynamic obtain IP ----Enable DHCP; If there is DHCP server in your local network, AG-188 will automatically obtain WAN port network information from your DHCP server. Configure PPPoE: ----Enable PPPoE ----PPPoE server: Enter “ANY”...
  • Page 11 AG-188 User Manual LAN Config Bridge Mode: Enable this option to switch to bridge mode. Gateway won’t assign IP for its LAN port in bridge mode and its LAN and WAN port will be in the same network. (This setting won’t take effect unless you save the config and reboot the device)

  • Page 12: Sip Config

    Proxy Password: proxy server password Domain Realm: SIP domain, enter the sip domain if any, otherwise AG-188 will use the proxy server address as sip domain. Local SIP port: Local SIP register port, default 5060 Phone Number:...

  • Page 13: Iax2 Config

    AG-188 will periodically detect whether the public SIP server is available, if the server is unavailable, the AG-188 will switch to the back-up SIP sever, and continue detecting the public sip server. AG-188 will switch back to the primary SIP server if the server is available again.
  • Page 14 AG-188 User Manual Local port: Signal port of local, default port is 4569 Phone Number: Phone number of your IAX account Voice mail number: If the IAX support voice mail, but your username of the voice mail is letters which you can not input with the ATA , then you use the number to stand for your username Voice mail text: if IAX support voice mail, config the domain name of your mail box here.

  • Page 15: Advance

    Lease Time: DHCP server lease time. Start IP: Start IP of lease table. End IP: End IP of lease table. Network device connecting to the AG-188 LAN port can dynamic obtain the IP in the range between start IP and end IP.
  • Page 16 AG-188 User Manual 1.5.2 NAT Advance NAT setting. Maximum 10 items for TCP and UDP port mapping. IPSec ALG: Enable/Disable IPSec ALG; FTP ALG: Enable/Disable FTP ALG; PPTP ALG: Enable/Disable PPTP ALG; Transfer Type: Transfer type using port mapping. Inside IP: LAN device IP for port mapping.

  • Page 17: Net Service

    AG-188 User Manual 1.5.3 Net Service HTTP Port: configure HTTP transfer port, default is 80.User may change this port to enhance system’s security. When this port is changed, please use http://xxx.xxx.xxx.xxx:xxxx/ to reconnect. Telnet Port: configure telnet transfer port, default is 23.
  • Page 18 Access list support two type limits: input_access limit or output_access limit. Each type support 10 items maximum. AG-188 firewall filter is base WAN port. So the source address or input destination address should be WAN port IP address. Configuration:...
  • Page 19 AG-188 User Manual Des Mask: Destination address mask. Indicate the source is dedicate IP if set to 255.255.255.255. Otherwise is network ID 19 / 53...
  • Page 20 AG-188 User Manual 1.5.5 QoS settings AT-530 IP phone implement QoS based on 802.1p, The QoS is used to mark the network communication priority in the data link/MAC sub-layer. AT-530 will sorted the packets using the QoS and sends it to the destination.
  • Page 21 AG-188 User Manual AG-188 Gateway implement QoS based on 802.1p, The QoS is used to mark the network communication priority in the data link/MAC sub-layer. AG-188 will sorted the packets using the QoS and sends it to the destination. QoS Enable: Enable QoS service.
  • Page 22 AG-188 User Manual 1.5.6 Advance SIP settings This page is used to set the private sip server, stun server, and back up sip server information. STUN Server setting: STUN Server Addr: configure stun server address; STUN Server Port: configure stun server port default 3478 STUN Effect Time: stun detect NAT type circle, unit: minute.

  • Page 23: Digital Map

    AG-188 support below digital map: Digital Map is based on some rules to judge when user end their dialing and send the number to the server. AG-188 support following digital map: ----End With “#”: Use # as the end of dialing.
  • Page 24 Enable Call Waiting: Enable/disable Call Waiting Accept Any Call: If this option is disable, AG-188 refuse the incoming call when the called number is different from AG-188’s phone number. No Answer Time: no answer call forward time setting.
  • Page 25 AG-188 User Manual Black List: incoming call in these phone numbers will be refused. Limit List: outgoing calls with these phone numbers will be refused 25 / 53...
  • Page 26 AG-188 User Manual 1.5.9 MMI Filter MMI filter is used to make access limit to AG-188 Gateway. When MMI filter is enable. Only IP address within the start IP and end IP can access AG-188 gateway. 26 / 53...
  • Page 27 AG-188 User Manual 1.5.10 Audio Settings CODEC: select the prefer CODEC; support ulaw, alaw and G729 Signal Standard: Support CHINA, Japan and USA standard Input Volume: Handset in volume. Output Volume: Handset out volume. G729 Payload Length: G729 payload length...

  • Page 28: Dial-Peer Settings

    AG-188 User Manual Dial-Peer Settings Please refer to “how to use dial rule?” for detail. 28 / 53...

  • Page 29: Config Manage

    AG-188 User Manual Config Manage Save Config: save current settings. Clear Config: restore to default settings. Notice: clear config in admin mode, all settings restores to factory default; clear config in guest modem, all settings except sip, advance sip restore to factory default.

  • Page 30: Update

    Web Update: update gateway’s settings or firmware. Firmware file is .dlf extension when configure file is .cfg extension, AG-188 will auto select configure update or firmware update according the extension. FTP Update: back up the configure file to FTP or TFTP server. Or auto update configure file from your auto update server.
  • Page 31 AG-188 User Manual Gateway original version is: <<VOIP CONFIG FILE>>Version:1.0000 <GLOBLE CONFIG MODULE> ConfFile Version：6 User may edit the configure file version to: <<VOIP CONFIG FILE>>Version:1.0007 <GLOBLE CONFIG MODULE> ConfFile Version：7 31 / 53...

  • Page 32: System Manage

    AG-188 User Manual 1.9 System Manage 1.9.1 Account Manage Set web access account or keypad password of AT-530. 1.9.2 Phone Book: User may set contacts in this page, and the contacts will be saved in the memory. Then using the Pbook, Vol+,Vol-,Menu/OK and Exit keys to choose your friend in the contacts and then press # to call out.

  • Page 33: Time Set

    AG-188 User Manual 2.9.4 Time Set: Server:type the ip address of time server Timezone:select correct time zone in list box Timeout: longest response time for SNTP Manual Timeset:The time setting Daylight: Daylight Saving time 2.1.1 Reboot: Reboot IP phone, some setting needs to reboot to make it works. Please always save config before reboot, otherwise the setting will return to previous setting.

  • Page 34: Use Normal Phone To Pre-Configure Ag-188 Gateway

    AG-188 User Manual Use normal phone to pre-configure AG-188 gateway User may pre-config AG-188 gateway using a normal phone connecting to AG-188. please refer the below command: Notice: all command below can be end with # to speed response. "#****"...

  • Page 35: Telnet Console

    4.1.1 Basic structure User may use telnet command to access and manage gateway. AG-188 adopts tree structure for telnet. Every node contains its sub-nodes or local command. User can type “help” or “?” whenever to see sub-nodes and all local command under current node.

  • Page 36: Global Command

    AG-188 User Manual 4.2 Global Command Global command is available under all nodes, AG-188 support following commands: Command Function Example chinese Set to Chinese UI #chinese clear Clear telnet screen #clear english Set to English UI #english exit Return to parent-node...

  • Page 37: Tree Structure

    AG-188 User Manual 5 Tree Structure 5.1.1 account path: <account># [stop]start Syslog ---syslog [no] start Configure Syslog server address and port ---syslog server –ip x.x.x.x _port xxx Example: #<config-account-syslog>#server –ip 202.112.20.10 Show syslog settings ---syslog show Show all account settings ---show 5.1.2 config...
  • Page 38 AG-188 User Manual Delete digital map rule ---no entry –prefix xxx Example: <config-dialrule>#no entry –prefix 010 Show current digital map ---show LAN interface settings path: <config-interface-fastethernet-lan># [disable]enable bridge mode ---[no]bridgemode [disable]enable DHCP service ---[no]dhcp-server [disable]enable NAT ---[no]nat Show current DHCP rules...
  • Page 39 AG-188 User Manual [disable]enable ftp alg ---[no]ftpalg [disable]enable ipsec alg ---[no]ipsecalg [disable]enable pptp alg ---[no]pptpalg Add TCP mapping rule ---tcp-entry –ip x.x.x.x –lanport xxx –wanport xxx Example:<config-nat>#tcp-entry –ip 192.168.1.5 –lanport 1720 –wanport 1000 Delete TCP mapping rule ---no entry –ip x.x.x.x –lanport xxx –wanport xxx Example:<config-nat>#no tcp-entry –ip 192.168.1.5 –lanport 5060 –wanport 1000...
  • Page 40 AG-188 User Manual ---entry –number xxx –ip x.x.x.x –protocol xxx _all xxx Example:<config-pbook>#entry –number 100 –ip 202.112.20.100 –protocol sip _all 123( user dial 100 and gateway will sent 100 instead) Add number-IP bond and delete the prefix of the destination number ---entry –number xxx –ip x.x.x.x –protocol xxx _del xxx...
  • Page 41 AG-188 User Manual PPPoE settings path: <config-pppoe># PPPoE account settings ---auth –user xxx -password xxx Example:<config-pppoe>#auth –user aaa –password 123456 [disable]enable service settings ---[no]service xxx Show pppoe settings ---show QOS settings path: <config-qos># [delete]add QoS table entry --- [no]entry –addr x.x.x.x –mask x.x.x.x Example:<config-qos>#entry –addr 202.112.10.1 –mask 255.255.255.0...
  • Page 42 AG-188 User Manual User management path: <config-user># Change user right. ---access –user xxx –access xxx Example:<config-user>#access –user aaa –access 7 Change user password ---password –user xxx Add new user ---entry –user xxx –access xxx Example:<config-user>#entry –user abc –access 7 Delete user entry ---no entry –user xxx...
  • Page 43 AG-188 User Manual 5.1.3 Debug (Level 0~7) path: <debug># show debug setting ---show [disable]enable debug all modules ---[no] all xxx [disable]enable debug app module ---[no] app xxx [disable]enable debug cdr module ---[no] cdr xxx [disable]enable debug sip module ---[no] sip xxx...

  • Page 44: Dhcp Server

    AG-188 User Manual Example: #<show>#capability debugging path: <show># show debug info Example:#<show>#debugging dhcp-server path: <show># show LAN status and DHCP server info Example:#<show># dhcp-server dial-rule path: <show># show digital-map info Example:#<show># dial-rule interface path: <show># show LAN info Example:#<show>#interface fastethernet lan show WAN info Example:#<show>#interface fastethernet wan...
  • Page 45 AG-188 User Manual Show ip packets Stat. Example:#<show>#ip ip Show RTP packets Stat. Example:#<show>#ip rtp Show TCP packets Stat. Example:#<show>#ip tcp Show UDP packets Stat. Example:#<show>#ip udp memory path: <show># show gateway memory Example:#<show>#memory path: <show># show NAT information Example:#<show>#nat...
  • Page 46 AG-188 User Manual PPPoE path: <show># show PPPoE info Example:#<show># pppoe path: <show># show QoS table info Example:#<show>#qos path: <show># show sip info Example:#<show>#sip udptunnel path: <show># show UDP tunnel info Example:#<show># udptunnel uptime path: <show># show running time Example:#<show># uptime...
  • Page 47 AG-188 User Manual Set SNTP IP address ---sntp server x.x.x.x Set SNTP server timeout ---sntp timeout xxx Set timezone (-12~+12) ---sntp zone xxx Show SNTP info ---sntp show Show current time ---print 5.1.10 tracert trace network path info usage: #tracert –host Example:#tracert www.google.com...
  • Page 48 AG-188 User Manual 6 Network Diagnosis There are some telnet commands for checking your network. Now Listing below for your information Command Function Example ping Check if the destination is accessible #ping www.google.com tracert Show network path info #tracert www.google.com...
  • Page 49 How to enter safe mode? In the AG-188 booting procedure, it use the static ip 192.168.1.179 (WAN port IP) for a short time, user can telnet to this ip address in this occasion to enter the save mode.(remember to change your PC into the network 192.168.1.xx )

  • Page 50: Digital Map

    How many SIP servers may AG-188 register simultaneously? AG-188 support 2 SIP servers and a IAX server. The Default server is SIP . If you want to use the IAX server you must set IAX as default protocol in the IAX config page. IAX and SIP can register simultaneously but not work simultaneously.
  • Page 51 075583018049 and AG-188 will send 8675583018049 to your server. *T rule: Dial the * and the line with switch to PSTN. Note that you need to set another rule “Prefix Number: *; Length: 1” in the Digital Map. (Refer “How to use AG-188’s Lifeline Function?”) 179 rule: when you dial 179 , the call with send to 192.168.1.179, suit for LAN application...

  • Page 52: How To Use Speed Dial Function

    AG-188 User Manual How to use speed dial function? Please refer to “How to use dial rule?”. How to configure digital map? Please refer digit map settings. How to use Call Forward, Call Transfer and 3-way Conference calls? User may set up the configuration in the Call Service page to use these value add service.
  • Page 53 AG-188 User Manual If A is the AG-188 user, and B calls and talking with A through VoIP. A can press the Hook-Flash to hold the call with B, and then press * and then enter C’s number. B will be transferred to C and can talk with C.

Table of Contents