Connecting The Weatheradio To An External System - Radio Shack 12-250 Owner's Manual

3. Align the keyhole slots
in the mounting bracket
with the screws on the
wall. Then press the
Weatheradio toward the
wall then downward to
secure it.
CONNECTING
THE WEATHERADIO TO AN
EXTERNAL SYSTEM
Your Weatheradio's
nect it to an external module interface (Plug 'n Power
or X-10, such as RSU 10037745) using twin-lead 20-
gauge cable (not supplied). Then you can set the in-
terface to indicate an alert (sound a buzzer or flash a
light, for example) on a connected appliance when
the Weatheradio receives a weather emergency alert
broadcast.
Note: Your local RadioShack store carries a wide se-
lection of cable and audible or visible alert accesso-
ries you can use with the recommended external
module interface.
To connect your Weatheradio to an external system,
connect the Weatheradio's positive (+) and negative
(–)
ALARM OUT
sponding (+ and –) terminals on the external system.
ALARM OUT
quick-connect terminals to the corre-
jacks let you con-
25