Statement
The Easiprox stand-alone proximity reader is low cost and
programmable in an access control system. It reads EM400x
proximity tags and cards. The reader can store the codes of
2000 unique tags. Adding and deleting tags is done by a
Master Tag. The optional Tag Simulator / Programming Unit
allows the adding& deleting of lost tags. The relay is
electrically or manually operated.
Specification
Operating Voltage: 12 VAC/DC
Current Draw: Pull in: 70mA/12VDC ; Holding :45mA/12VDC
RF Frequency: EM 125KHz
Input: 1 contact for request-to-exit button
Relay rating: MAX . 3A/24VDC
Memory Volume: 2000 Proximity cards or tokens
Read Range: 10~15 cm (Depending on local installation
Conditions)
Relay Strike Time: 0.7~42 seconds
Visual Signals:
Yellow: Power on
Green: Add Tags
Red: Delete Tags
Yellow/Red: Clear Memory
Yellow (flash): strike mode and timer adjustment
Operating Temperature: -20ºC~70ºC
Ambient Humidity: 5~95% relative humidity (non-
condensing)
Case Material: ABS (UL94V0)
Color: Black/ Beige White
Copyright © Gianni Industries, Inc. All rights reserved.
DM-CA-Easiprox-ANSI Ver. E Published on 2011.07.12
Easiprox ANSI Stand Alone Reader
Dimensions
69.5
10
114
30
System Features
A capacity of 2,000-card memory
m e e t s c o m m o n c o m m u n i t y o r
company needs..
Field proven unique Master card adds
or deletes cards or tags.
E a s y t o o p e r a t e f o r e v e r y o n e .
Optional
adding and deleting cards from the
reader memory.
GIANNI INDUSTRIES, INC.
No. 13, Zhongxing Rd., Tucheng Dist., New Taipei
City 236,Taiwan (R.O.C.)
Tel: 886-2 2267 7986 / Fax: 886-2 2267 9876
E-Mail: inquiry@gianni.com.tw
Website: gianni.tw
Unit: mm
TS-980
tag simulator allows