Operational Instructions; Connecting To Windows Pc Or Laptop - Tablerock Shortwave Daddy Operating Manual

Operational Instructions:

Connecting to Windows PC or Laptop:

1. Plug a set of unshielded ear buds into the 3.5mm antenna jack to serve as an
initial antenna or use the BNC connector to connect an antenna to the radio.
Note: The 3.5mm jack can only serve as an antenna jack. It is not a
headphone jack.
2. Connect the Shortwave Daddy to a PC or laptop USB port using a standard USB
printer cable.
3. Restart your PC or Laptop.
4. The Title Screen will appear on the LCD screen for approximately seven (7)
seconds. (Figure 25 )
Figure 25
5. After the title screen, a new screen will appear as shown in Figure 26.
27