Maintenance - Ranger Hand-Held Body Scanner Owner's Manual

MAINTENANCE

Your Ranger Body Scanner/Metal Detector is an example of superior design
and craftsmanship. The following suggestions will help you care for the Body
Scanner so you can enjoy it for years.
• Keep the Body Scanner dry. If it gets wet, wipe it dry immediately. Liquids
can contain minerals that can corrode the electronic circuits.
• Handle the Body Scanner gently and carefully. Dropping it can damage the
circuit boards and case and can cause the Body Scanner to work improperly.
• Use and store the Body Scanner only in normal temperature environments.
Temperature extremes can shorten the life of electronic devices and distort or
melt plastic parts.
• Keep the Body Scanner away from dust and dirt, which can cause premature
wear of parts.
• Wipe the Body Scanner with a damp cloth occasionally to keep it looking
new. Do not use harsh chemicals, cleaning solvents, or strong detergents to
clean the security wand.
Modifying or tampering with the Body Scanner's internal parts can cause a
malfunction and might invalidate your Body Scanner's warranty. If your Body
Scanner is not operating as it should, send it to the address on the back of this
manual along with your proof-of-purchase.
14