Table of Contents
Advertisement
A. Instructions
1.
Start the Network Configuration Manager:
2.
Remove any adapters that are configured with the old drivers by
selecting the Hardware menu -> Remove Network Device.
Exit the Network Configuration Manager.
3.
Verify that there is not an older version of the driver on the system
using 'pkginfo -l <driver_name>'. For example, enter:
If there is, remove the driver using 'pkgrm <driver_name>'. For
example:
Reboot the system:
4.
If you are installing the new driver from the CD, follow these steps.
Otherwise, go to the next step.
Mount the CDROM on the system. For example:
You can install the driver directly from the CDROM or spool the
driver from the CDROM so the driver resides on the system.
Example of installing the driver directly from the CD:
Example of spooling the driver from the CD to the system:
2-18
netcfg
pkginfo -l e1008g
pkgrm e1008g
init 6
mkdir /<cdrom_mount_location>
mount -F cdfs -r /dev/cdrom/cdrom1 /
<cdrom_mount_location>
pkgadd –d /<cdrom_mount_location>/UNIX/UW7DDI8/
e1008g.pkg
pkgadd -s spool –d /<cdrom_mount_location>/UNIX/
UW7DDI8/e1008g.pkg e1008g
pkgadd e1008g
ASUS PXI-G45 User Guide
Advertisement
Table of Contents
