2.7 Jumpers
The jumpers on the motherboard allow you to change some feature
settings to suit your customized system configuration.
Motherboard Frequency Settings (DSW Switches)
The motherboard frequency is adjusted through the DSW switches. The
illustration below shows the default position:
P4S533-E
P4S533-E DIP Switches
Before changing any DSW or jumper setting, make sure to read the
jumper descriptions and setting requirements in this section.
1. JumperFree
This jumper enables or disables the JumperFree
setting, [1-2], enables JumperFree
processor settings to be made through the BIOS setup (see 4.4 Advanced
Menu).
P4S533-E
®
P4S533-E JumperFree™ Mode Setting
24
®
™
Mode (JEN1)
OFF
ON
DSW1
1. Frequency Selection
2. Frequency Selection
3. Frequency Selection
4. Frequency Selection
5. Frequency Selection
™
mode. JumperFree
JEN1
DSW1
2
1
Jumper Mode
Chapter 2: Hardware information
™
mode. The default
™
mode permits
OFF
ON
3
2
Jumper Free
(Default)