1. Manuals
  2. Brands
  3. AirLive Manuals
  4. Modem
  5. ARM-201
  6. User manual

AirLive ARM-201 User Manual

Wired adsl2/2+ ethernet/usb modem
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
ARM-201
Wired ADSL2/2+
Ethernet/USB Modem
User's Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ARM-201 and is the answer not in the manual?

Questions and answers

Related Manuals for AirLive ARM-201

Summary of Contents for AirLive ARM-201

  • Page 1 ARM-201 Wired ADSL2/2+ Ethernet/USB Modem User’s Manual...

  • Page 2: Declaration Of Conformity

    OvisLink Corp. 5F., NO.6, Lane 130, Min-Chuan Rd., Hsin-Tien City, Taipei County, Taiwan Declare that the product Wired ADSL2/2+ Ethernet/USB Modem AirLive ARM-201 is in conformity with In accordance with 89/336 EEC-EMC Directive and 1999/5 EC-R & TTE Directive Clause Description...
  • Page 3 Directiva 1999/5/CE. disposiciones aplicables o exigibles de la Directiva 1999/5/CE. ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ OvisLink Corp. ΔΗΛΩΝΕΙ OvisLink Corp izjavlja, da je ta AirLive ARM-201 v Ελληνική [Greek] ΟΤΙ AirLive ARM-201 ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ Slovensko skladu z bistvenimi zahtevami in ostalimi relevantnimi ΤΙΣ...
  • Page 4 Per FCC 15.21, you are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment. All brand and product names mentioned in this manual are trademarks and/or registered trademarks of their respective holders. AirLive ARM-201 User’s Manual...

  • Page 5: Table Of Contents

      4.4.3 NAT ................................. 54   4.4.4 QoS ................................. 57   4.4.5 VLAN  ................................ 57   4.4.6 ADSL ................................ 58     ............................ 60         CCESS  ANAGEMENT   4.5.1 ACL.................................. 60   4.5.2 IP Filter ................................ 61   4.5.3 SNMP  ................................ 64   4.5.4 UPnP  ................................ 64   4.5.5 DDNS ................................ 65   4.5.6 CWMP ................................ 66 AirLive ARM-201 User’s Manual...
  • Page 6           ROBLEMS WITH THE  OGIN  SERNAME AND  ASSWORD   .......................... 77           ROBLEMS WITH    NTERFACE    .......................... 77           ROBLEMS WITH    NTERFACE    ........................ 78           ROBLEMS WITH THE  NTERNET  CCESS AirLive ARM-201 User’s Manual...

  • Page 7: Chapter 1: Introduction

    ITU-T G.992.3 (ADSL2 G.dmt.bis) ITU-T G.992.4 (ADSL2 G.lite.bis) ITU-T G.992.5 (ADSL2+; Annex A, B, I, J, L & M) Reach Extended ADSL (RE ADSL) Setup Wizard Supports Setup Wizard Web GUI to install this ADSL router easily and quickly. AirLive ARM-201 User’s Manual...
  • Page 8 Command-line Interpreter (CLI) Telnet Remote Management Firmware upgrade via FTP / TFTP (Web-based GUI) Built-in Diagnostic tool and IP Ping SNMP (Simple Network Management Protocol) Support It’s an easy way to remote control the router via SNMP. AirLive ARM-201 User’s Manual...
  • Page 9 Routing (TCP/IP/UDP/ARP/ICMP) IP Multicast IGMP v1/v2 Security PPP over PAP (Password Authentication Protocol; RFC1334) PPP over CHAP (Challenge Authentication Protocol; RFC1994) VPN (IPsec, PPTP, L2TP) pass through Built-in NAT Firewall IP-based Packet filtering Password Protected System Management AirLive ARM-201 User’s Manual...

  • Page 10: Chapter 2: Hardware Installation

    RJ-11 Phone cable USB Cable Power Adapter Software driver CD Quick Installation Guide 2.3 Front Panel Indicators and Description Front panel of ADSL router has LED indicators to display router’s operating status. One-Port ADSL Router Front Panel (ARM-201) AirLive ARM-201 User’s Manual...
  • Page 11 When port 1 connection with PC or Switch / Hub is established, this LED will light up. When connection with Internet (ADSL Connected) is established, this LED will light up. ADSL When this LED is flashing: NO ADSL physical connection AirLive ARM-201 User’s Manual...

  • Page 12: Back Panel

    2.4 Back Panel One-Port ADSL Router Back Panel (ARM-201) Descriptions of All Connectors LINE Connect with phone cable Connect with USB cable to PC DEFAULT Reset button. Connect with Ethernet Cable to Switch Hub or PC Connect with power adapter ON/OFF Power switch button AirLive ARM-201 User’s Manual...

  • Page 13: Connect Related Devices

    5) If you connect your router via USB cable, plug the provided USB cable into USB port on the back panel of the router and insert the other end of the USB cable to PC. Warning! Use only the power adapter provided in the package. Use of other power adapters may cause hardware damage. AirLive ARM-201 User’s Manual...

  • Page 14: Chapter 3: Connecting Adsl2+ Router Via Ethernet And Usb

    If not, please double click the CD-ROM device icon in "My computer", and execute autorun.exe. The following screen will be displayed. Click “Setup Wizard”. Step 2: Please select the country you have installed the ADSL router and click “Next”. AirLive ARM-201 User’s Manual...
  • Page 15 Click “Next” to save the settings and reboot the router. Step 6: After saving and rebooting the router, the ISP settings are all finished. This wizard will then help to set your computer to obtain IP Address from the router automatically AirLive ARM-201 User’s Manual...

  • Page 16: Setup Adsl2+ Router Via Ethernet Cable

    Connect ADSL Router and PC with USB cable. Step 2: Once “Found New Hardware Wizard” window pops out, chooses “Install from a list or specific location (advanced)”. Click ‘Next’ or “Locate and install driver software” and follow Windows instructions. AirLive ARM-201 User’s Manual...
  • Page 17 (Figure 1: For Windows Vista) Please do not select Windows Update to search for software. (Figure 2: For Windows 2000 and XP) AirLive ARM-201 User’s Manual...
  • Page 18 3a) Select “Install from a list or specific location (Advanced)” and click “Next>”. 3b) Make sure that the “Search for the best driver in these locations” option is chosen with the sub-option AirLive ARM-201 User’s Manual...
  • Page 19 “Include this location in the search” checked. Select the drive of the installation CD and click ‘Browse’. AirLive ARM-201 User’s Manual...
  • Page 20 3c) Search for the folder with the driver appropriate for your operating system. Then click ‘OK’. 3d) Click ‘Next>’. AirLive ARM-201 User’s Manual...
  • Page 21 3e) The operating system will then search for the designated device driver. 3f) If the following dialog appears, click “Continue Anyway”. AirLive ARM-201 User’s Manual...
  • Page 22 In Windows 98SE Operation System, the setup program will ask restart the computer to complete the installation. Please follow the below processes: Step 5: Click “OK” to restart your computer. Step 6: After system is rebooted, Insert Disk information window will show as below, click “OK” to continue. AirLive ARM-201 User’s Manual...
  • Page 23 “Yes” to reboot your system again. To verify your router is installed properly, please follow the below descriptions: [For Windows Vista] Go through “Start Control Panel System Device Manager” to check if USB device is installed properly. AirLive ARM-201 User’s Manual...
  • Page 24 [For Windows Go through “Start Control Panel System Hardware Device Manager” to check if USB device is installed properly. AirLive ARM-201 User’s Manual...
  • Page 25 Hardware Device Manager” to check if USB device is installed properly. [For Windows 98SE & After OS boots up, go through “Start Settings Control Panel System Device Manger” to check if USB device is installed properly, AirLive ARM-201 User’s Manual...

  • Page 26: Configure Tcp/Ip

    Components and click Properties button. Step 4: You can setup the following configurations in two methods: Option1: Get an IP from Router Automatically Select the IP Address tab. In this page, click Obtain an IP address automatically radio button. AirLive ARM-201 User’s Manual...
  • Page 27 1) At IP Address tab, select Specify an IP address, set default IP address for the Router is 192.168.2.1, so use 192.168.2.X (X is a number between 2 to 254) for IP Address field and 255.255.255.0 for Subnet Mask field. AirLive ARM-201 User’s Manual...
  • Page 28 2) Select Gateway tab and add default Router IP Address “192.168.2.1” in the New gateway field and click Add. Under DNS Configuration tab, select Enable DNS and add DNS values (192.168.2.1) in DNS Server Search Order field then click Add. AirLive ARM-201 User’s Manual...
  • Page 29 (b) Or, go to Start / Settings / Control Panel. In the Control Panel, double-click on Network and Dial-up Connections. Step 2: Right click Local Area Connection (your local network hooked up with ADSL router) and select Properties: AirLive ARM-201 User’s Manual...
  • Page 30 Step 3: Select Internet Protocol (TCP/IP) then click Properties: Configure IP Automatically: Step 4: Select Obtain an IP address automatically and Obtain DNS server address automatically then click OK to complete IP configuring process. AirLive ARM-201 User’s Manual...
  • Page 31 IP address: Fill in IP address 192.168.2.x (x is a number between 2 to 254). Subnet mask: Default value is 255.255.255.0. Default gateway: Default value is 192.168.2.1. Preferred DNS server: Fill in preferred DNS server IP address. Alternate DNS server: Fill in alternate DNS server IP address. AirLive ARM-201 User’s Manual...
  • Page 32 For Windows XP Step 1: Click Start then select Control Panel (in the Classic View). Step 2: Double-click Network Connections icon. AirLive ARM-201 User’s Manual...
  • Page 33 Step 3: Right-click Local Area Connection (local network your ADSL hooked up with) and select Properties: Step 4: Select Internet Protocol (TCP/IP) then click Properties: AirLive ARM-201 User’s Manual...
  • Page 34 Select Use the following IP address and Use the following DNS server addresses. IP address: Fill in IP address 192.168.2.x (x is a number between 2 to 254). Subnet mask: Default value is 255.255.255.0. Default gateway: Default value is 192.168.2.1. AirLive ARM-201 User’s Manual...
  • Page 35 Request timed out. Request timed out. Request timed out. This failure might be caused by cable issue or something wrong in configuration procedure. For Windows Vista Step 1: Click Start then select Control Panel (in the Classic View). AirLive ARM-201 User’s Manual...
  • Page 36 Step 2: Double-click Network and Sharing Center icon. Step 3: Select “Manage Network connections”. AirLive ARM-201 User’s Manual...
  • Page 37 Right-click Local Area Connection (local network your ADSL hooked up with) and select Properties: Step 5: Select Internet Protocol (TCP/IP) then click Properties: Configure IP address Automatically: Step 6: Select Obtain an IP address automatically and Obtain DNS server address automatically. Click OK to finish the configuration. AirLive ARM-201 User’s Manual...
  • Page 38 IP address: Fill in IP address 192.168.1.x (x is a number between 2 to 254). Subnet mask: Default value is 255.255.255.0. Default gateway: Default value is 192.168.2.1. Preferred DNS server: Fill in preferred DNS server IP address. Alternate DNS server: Fill in alternate DNS server IP address. AirLive ARM-201 User’s Manual...

  • Page 39: Usb Device Driver Installation On Mac Os

    Double-click the compressed “.zip” file to unzip the file. Then, you will get a “.pkg” file. Step 2. Double-click the “.pkg” file, the AirLive ADSL modem installer windows will appear. Click “Continue” to go next process AirLive ARM-201 User’s Manual...
  • Page 40 Step3. Select a Destination to install the AirLive ADSL Modem software and click “Continue”. Step 4. Click “Continue” to go next process. Step 5. Click “Install” to begin the installation process. AirLive ARM-201 User’s Manual...
  • Page 41 Step 6. Enter your Name and Password for your system. Then, click “OK” to continue. Step7. Click “Continue Installation” to start installation. AirLive ARM-201 User’s Manual...
  • Page 42 Step 8. Click “Restart” to finish installing the software. Step 9. After restart the PC, click “System Preferences” on the bottom of the desktop. AirLive ARM-201 User’s Manual...
  • Page 43 Step 10. Click “Network” icon on the System Preferences windows. Step 11. Once your Ethernet Adapter’s button is “Green”, it means your ADSL Router is successful installed. AirLive ARM-201 User’s Manual...
  • Page 44 Fill in TCP/IP IP address. IP address: Fill in IP address 192.168.1.x (x is a number between 2 to 254). Subnet mask: Default value is 255.255.255.0. Router: Default value is 192.168.2.1 Step13. Go to “Applications” double-click “Internet Explorer” icon. AirLive ARM-201 User’s Manual...
  • Page 45 Entry of the username and password will be displayed. Enter the default User ID and Password. The default login User ID of the administrator is admin, and the default admin login password is airlive. Then, click “OK” to enter. AirLive ARM-201 User’s Manual...
  • Page 46 After you enter User ID and Password, the main webpage will show as below: AirLive ARM-201 User’s Manual...

  • Page 47: Chapter 4: Configure Adsl2+ Router Via Html Interface

    3) Entry of the username and password will be displayed. Enter the default login User Name and Password: The default login User Name of the administrator is admin, and the default login password airlive. The main webpage will be displayed as below: AirLive ARM-201 User’s Manual...

  • Page 48: Quick Start

    This Quick Start will guide you step by step to configure the password, time zone, and WAN settings of you device. This Wizard is a helpful guide for first time uses to the device. NOTE: It is a strong recommendation that using Quick Start to configure your ADSL settings. AirLive ARM-201 User’s Manual...
  • Page 49 Please follow the quick start step by step to configure the device. Note: If your ISP doesn’t provide DNS, after you complete Quick Start configuration, please go to Interface Setup Internet to configure your DNS settings. AirLive ARM-201 User’s Manual...

  • Page 50: Interface Setup

    ATM QoS: Select the Quality of Service types for this Virtual Circuit. The ATM QoS types include CBR(Constant Bit Rate), VBR(Variable Bit Rate) and UBR (Unspecified Bit Rate). These QoS types are all controlled by the parameters specified below, including PCR, SCR, and MBS. AirLive ARM-201 User’s Manual...
  • Page 51 SCR: Sustained Cell Rate. MBS: Maximum Burst Size. [Encapsulation] Dynamic IP: Select this option if your ISP provides you an IP address automatically. This option is typically used for Cable services. Please enter the Dynamic IP information accordingly. AirLive ARM-201 User’s Manual...
  • Page 52 Static PPPoE to use static IP address for your PPPoE connection. Please enter the information accordingly. Username: Enter your username for your PPPoE/PPPoA connection. Password: Enter your password for your PPPoE/PPPoA connection Encapsulation: For both PPPoE/PPPoA connections, you need to specify the type of Multiplexing, either AirLive ARM-201 User’s Manual...
  • Page 53 NAT: Select this option to Activate/Deactivated the NAT (Network Address Translation) function for this VC. The NAT function can be activated or deactivated per PVC basis. Default Router: Select whether this PVC will be default router for internet data. AirLive ARM-201 User’s Manual...

  • Page 54: Lan

    Unless you are implementing sub netting, use the subnet mask computed by the ADSL router. Dynamic Route: Select the Dynamic Route from RIP1, RIP2-B, and RIP2-M. Please refer to Internet Dynamic Route. The only difference is the interface. AirLive ARM-201 User’s Manual...
  • Page 55 DNS Rely Selection: If user wants to disable this feature, he just needs to set both Primary & Secondary DNS to 0.0.0.0. Using DNS relay, users can setup DNS server IP to 192.168.2.1 on their computer. If not, device will perform as NO DNS relay. AirLive ARM-201 User’s Manual...

  • Page 56: Advanced Setup

    Internet router it should contact to route the data most efficiently. Select this option will list the routing table information. You can press ADD ROUTE to edit the static route. [Static Route] Select this option to set Static Routing information. AirLive ARM-201 User’s Manual...

  • Page 57: Nat

    LAN as the public IP address you use on the Internet. You define NAT rules that specify exactly how and when to translate between public and private IP addresses. Simply select this option to setup the NAT function for your ADSL router. AirLive ARM-201 User’s Manual...
  • Page 58 Users of the public network outside the company can access only the DMZ host. DMZ Host IP Address: Enter the specified IP Address for DMZ host on the LAN side AirLive ARM-201 User’s Manual...
  • Page 59 End port number the same as Start port number. For example, set the FTP Virtual server, you can set the start and end port number to 21. Local IP Address: Enter the IP Address for the Virtual Server in LAN side. AirLive ARM-201 User’s Manual...

  • Page 60: Qos

    (1) Port-Based VLAN: each physical switch port is configured with an access list specifying membership in a set of VLANs. (2) ATM VLAN-using LAN Emulation(LANE) protocol to map Ethernet packets into ATM cells and deliver AirLive ARM-201 User’s Manual...

  • Page 61: Adsl

    Define VLAN Group: Based on each VLAN group, you can configure each group’s VLAN setting. You can configure up to 8 VLAN settings. 4.4.6 ADSL Select this option to set ADSL Mode and ADSL Type information. AirLive ARM-201 User’s Manual...
  • Page 62 ADSL Mode: You can set your ADSL mode in this section. The option has Auto Sync-up, ADSL2+, ADSL2, G.DMT, T1.413, G.LITE ADSL Type: ANNEX A, ANNEX I, ANNEX A/L, ANNEX M, ANNEX A/I/J/L/M AirLive ARM-201 User’s Manual...

  • Page 63: Access Management

    4. Choose the Application which you want to access for this ACL Rule index. 5. Select the Interface you want to access from. 6. After all settings are ready, click SAVE and continue next ACL Rule Index setting. AirLive ARM-201 User’s Manual...

  • Page 64: Ip Filter

    IP Filter is a more complex filtering tool, based more on IP and custom rules. Each of the indices can hold six rules, and each interface can have four associated indices, allowing 24 rules per interface. If all six rules in an index are Next rules, the data will be sent to the next index for filtering. AirLive ARM-201 User’s Manual...
  • Page 65 Source IP Address: Enter the source IP address you wish to deny access to your system. Subnet Mask: Enter the subnet mask of the source IP address. Port Number: Enter the port number of the source IP address. Note that 0 means all that ports are allowed. AirLive ARM-201 User’s Manual...
  • Page 66 Forward means that the data will be allowed into your system. Note that a Forward rule should be the last rule, as no data will be compared to rules after a Forward rule. IP/MAC Filter Set Index: Select the IP/MAC filter set you wish to view. For Example AirLive ARM-201 User’s Manual...

  • Page 67: Snmp

    IP address, convey its capabilities and learn about other devices on the network. In turn, a device can leave a network smoothly an automatically when it is no longer in use. UPnP broadcasts are only allowed on the LAN. AirLive ARM-201 User’s Manual...

  • Page 68: Ddns

    This is for people with a dynamic IP from their ISP or DHCP server that would still like to have a DNS name. The Dynamic DNS service provider will give you a password or key. AirLive ARM-201 User’s Manual...

  • Page 69: Cwmp

    DSL Forum. Using TR-069 the terminals can get in contact with the Auto Configuration Servers (ACS) and establish the configuration automatically. Accordingly other service functions can be provided. TR-069 is the current standard for activation of terminals in the range of DSL broadband market. AirLive ARM-201 User’s Manual...
  • Page 70 AirLive ARM-201 User’s Manual...

  • Page 71: Maintenance

    NTP (Network Time Protocol) server. If an NTP server is set, you will only need to set the time zone. If you manually set the time, you may also set Daylight Saving dates and the system time will automatically adjust on those dates. AirLive ARM-201 User’s Manual...

  • Page 72: Firmware

    New Firmware Location: Type in the location of the file you want to upload in this field or click Browse… to find it. UPGRADE: Click UPGRADE to begin the upload process. 4.6.4 System Restart The SysRestart screen allows you to restart your router with either its current settings still in place or the factory default settings. AirLive ARM-201 User’s Manual...

  • Page 73: Diagnostic

    The Diagnostic Test page shows the test results for the connectivity of the physical layer and protocol layer for LAN & WAN sides. Note: 1) User ONLY can view PVC0’s Diagnostic Test connection. 2) “Testing ADSL Synchronization” might take 30 sec to execute the Diagnostic Test. AirLive ARM-201 User’s Manual...

  • Page 74: Status

    Except the Virtual Circuit, click the drop-down list and select the name of the Virtual Circuit on which the system status is to be shown. [Device Information] Firmware Version: This filed displays current firmware version. MAC Address: The MAC (Media Access Control) or Ethernet address unique to your modem. AirLive ARM-201 User’s Manual...

  • Page 75: System Log

    Windows File Download dialog box that enables opening or saving the contents of the log to your PC. To remove all entries from the list, click Clear Log. New entries will begin accumulating. If the device is rebooted, the logs are automatically cleared. AirLive ARM-201 User’s Manual...

  • Page 76: Statistic

    Router on both the WAN port & the LAN port. The traffic counter will reset if the device is rebooted. You can select Ethernet/ADSL to view the statistics report of LAN/WAN. AirLive ARM-201 User’s Manual...
  • Page 77 Ethernet connection. Click on REFRESH to update the screen. [ADSL] The ADSL screen gives you information about how much data your router has transmitted or received across the ADSL connection. Click on REFRESH to update the screen. AirLive ARM-201 User’s Manual...

  • Page 78: Chapter 5: Troubleshooting

    Make sure that the telephone company has checked your phone line and set it up for ADSL service. Reset your ADSL line to reinitialize your link to the DSLAM. If these steps fail to correct the problem, contact your local distributor for assistance. AirLive ARM-201 User’s Manual...

  • Page 79: Problems With The Web Interface

    Press the DEFAULT button for five seconds, and then release it. When the ADSL LED begins to blink, the defaults have been restored and the router restarts. The default username is “admin”. The default password is “airlive”. The Password and Username fields are case-sensitive. Make sure that you enter the correct password and username using the proper casing.

  • Page 80: Problems With Lan Interface

    MAC address or the host name. The username and password apply to PPPoE and PPoA encapsulation only. Make sure that you have entered the correct Service Type, User Name and Password (be sure to use the correct casing). AirLive ARM-201 User’s Manual...

  • Page 81: Problems With The Internet Access

    ESSID, channel and WEP keys (if WEP encryption is activated). Internet connection disconnects. STEPS CORRECTIVE ACTION Check the schedule rules. If you use PPPoA or PPPoE encapsulation, check the idle time-out setting. Contact your ISP. AirLive ARM-201 User’s Manual...

Table of Contents