Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for AirLive WT-2000 USB
Summary of Contents for AirLive WT-2000 USB
- Page 1 WT-2000 USB Turbo-G Wireless LAN Card User’s Manual...
-
Page 2: Declaration Of Conformity
OvisLink Corp. 5F., NO.6, Lane 130, Min-Chuan Rd., Hsin-Tien City, Taipei County, Taiwan Declare that the product Turbo-G USB Adapter AirLive WT-2000USB is in conformity with In accordance with 89/336 EEC-EMC Directive and 1999/5 EC-R & TTE Directive Clause Description Electromagnetic compatibility and Radio spectrum Matters (ERM);... - Page 3 1999/5/CE. muiden ehtojen mukainen Ar šo OvisLink Corp. deklarē, ka AirLive WT- Hér með lýsir OvisLink Corp yfir því að AirLive WT- Latviski [Latvian] 2000USB atbilst Direktīvas 1999/5/EK Íslenska [Icelandic] 2000USB er í...
-
Page 4: Federal Communication Commission Interference Statement
FCC Caution This equipment must be installed and operated in accordance with provided instructions and a minimum 20 cm spacing must be provided between computer mounted antenna and person’s body (excluding extremities of hands, wrist and feet) AirLive WT-2000USB User’s Manual... - Page 5 Netherlands, Portugal, Spain, Sweden, and the United Kingdom. The ETSI version of this device is also authorized for use in EFTA member states: Iceland, Liechtenstein, Norway, and Switzerland. EU Countries Not intended for use None. AirLive WT-2000USB User’s Manual...
-
Page 6: Table Of Contents
3.2.1.3 802.1x Setting-Certification ............21 3.2.1.4 802.1x Setting-CA Server............23 3.3 Link Status ....................24 3.4 Advance......................25 3.5 About ......................28 3.6 Turbo Mode....................28 3.7 WMM Function ..................... 29 CHAPTER IV: TROUBLESHOOTING ............31 AirLive WT-2000USB User’s Manual... -
Page 7: Chapter I: Introduction
Chapter I: Introduction Thank you for purchasing the 802.11g Wireless LAN PCI Card. This card complies with IEEE 802.11g standard, which supports up to 54Mbps high-speed wireless network connections. It can also work with IEEE 802.11b devices. When the card connects to 11b devices, the link speed will be up to 11Mbps. This card enables higher data throughput than the IEEE 802.11g standard (up to 54Mbps). -
Page 8: Features
Temperature: 32~131°F (0 ~ 55°C) • Humidity: Max. 95% (NonCondensing) • Certification: FCC, CE 1.3 Package Contents Before you begin the installation, please check the items of your package. The package should include the following items: AirLive WL-1000CAM User’s Manual... - Page 9 • One PCI Card • One CD (Driver/Utility/User’s Manual.) • One Quick Guide If any of the above items is missing, contact your supplier as soon as possible. AirLive WT-2000USB User’s Manual...
-
Page 10: Chapter Ii: Installation Procedure
Secure the antenna to the antenna connector of the card. Turn on the computer. 2.2 Install the Driver and Utility “Found New Hardware Wizard” is displayed after the PCI card is installed and the computer is restarted. Click “Cancel”. AirLive WL-1000CAM User’s Manual... - Page 11 Insert the Installation CD to your CD-ROM Drive. Execute the “setup” program. Click “Next” to process the installation if you accept the license agreement. The system starts to install the software of the card. AirLive WT-2000USB User’s Manual...
- Page 12 The system will automatically detect the card and display “Hardware Installation” screen. Click “Install” to continue. Please click “Finish” to complete the installation. AirLive WL-1000CAM User’s Manual...
-
Page 13: Chapter Iii: Configuration Utility
Select “Use Zero Configuration as Configuration Utility” to use Windows XP built-in wireless configuration utility (Windows Zero Configuration) to configure the card. Exit Select “Exit” to close the Configuration Utility tool. In Windows XP, there is a “Windows Zero Configuration Tool” for you to setup wireless clients. By AirLive WT-2000USB User’s Manual... - Page 14 First Way Right click the icon in the system tray and select “Use RaConfig as Configuration Utility”. Second Way Right-click the icon and select “View Available Wireless Networks”. Click “Advanced”. AirLive WL-1000CAM User’s Manual...
- Page 15 Uncheck “Use Windows to configure my wireless network settings” to enable the utility for the card. Note: If “Wireless Zero Configuration” is enabled, you can only configure the advance setting or check the link status and statistics from the configuration utility of the card. AirLive WT-2000USB User’s Manual...
-
Page 16: Site Survey
Rescan Button Click “Rescan” button to collect the new information of all the wireless networks nearby. Connect Button Click “Connect” to connect to the selected network. Add to Profile Button Add the selected network to Profiles list. AirLive WL-1000CAM User’s Manual... -
Page 17: Profile
This sign indicates the activated profile is not been connecting. Add/Delete/Edit Button Click these buttons to add/delete/edit the selected profiles. Activate Button Click “Activate” to connect to the selected profile. When a profile is activated, the card will be initially connected to the profile. AirLive WT-2000USB User’s Manual... -
Page 18: Configure The Profile
3.2.1 Configure the Profile AirLive WL-1000CAM User’s Manual... -
Page 19: Configuration
802.11 G only – This card can be compatible with both 802.11g and 802.11b wireless stations. If there are only 802.11g wireless stations in the network, you can set the card to this mode. Preamble The preamble defines the length of the CRC block for communication AirLive WT-2000USB User’s Manual... - Page 20 256 to 2346 bytes. Minor change is recommended. Channel This setting is only available for Ad Hoc mode. Select the number of the radio channel used for the networking. The channel setting should be the same with the network you are connecting to. AirLive WL-1000CAM User’s Manual...
-
Page 21: Authentication And Security
Standard (AES). AES is required to the corporate user or government users. The difference between WPA and WPA2 is that WPA2 provides data encryption via the AES. In contrast, WPA uses Temporal Key Integrity Protocol (TKIP). AirLive WT-2000USB User’s Manual... - Page 22 For example: “0123456aef“ or “test1”. 128-bit – Input 26-digit Hex values (in the “A-F”, “a-f” and “0-9” range) or 13-digit ASCII characters (including “a-z” and “0-9”) as the encryption keys. For example: “01234567890123456789abcdef“ or “administrator”. AirLive WL-1000CAM User’s Manual...
- Page 23 Access Point Windows 2000 IAS (Internet Authentication Service) (1) Client requests to login the (3) Send username, password to network. RADIUS server. (4) Approve or deny user (2) Login with username, login to the LAN. password. AirLive WT-2000USB User’s Manual...
-
Page 24: 802.1X Setting-Certification
A client certificate is required for TLS, and is optional for TTLS and PEAP. This forces a client certificate to be selected from the appropriate Windows Certificate Store and made available to the RADIUS server for certification. AirLive WL-1000CAM User’s Manual... - Page 25 <name of the user>@<user’s home realm>. The user’s home realm is optional and indicates the routing domain. Password The password used for authentication. It may contain up to 63 ASCII characters and is case sensitive. AirLive WT-2000USB User’s Manual...
-
Page 26: 802.1X Setting-Ca Server
(e.g. zeelans.com, where the server is blueberry.zeelans.com) but it may be any name used in the certificate name field. AirLive WL-1000CAM User’s Manual... -
Page 27: Link Status
This bar shows the signal strength level. The higher percentage shown in the bar, the more radio signal been received by the card. This indicator helps to find the proper position of the wireless device for quality network operation. AirLive WT-2000USB User’s Manual... -
Page 28: Advance
This option enables you to view the statistic information of the connection including transmit statistics and receive statistics. You may reset the counters by clicking ”Reset Counter”. Advance This option enables you to configure more advanced settings, for example: wireless mode, protection mode and etc. AirLive WL-1000CAM User’s Manual... - Page 29 When the wireless mode is “802.11 B only”, the maximum data rate is 11Mbps (11b) so that there are only “Auto/1/2/5.5/11Mbps” options you can select. Tx BURST Tx Burst enables the card to deliver the better throughput in the same period and environment. AirLive WT-2000USB User’s Manual...
- Page 30 The Cisco AP can perform monitoring measurements through the Measurements CCX-compliant clients on the non-serving channels when this parameter is enabled. It limits the channel measurement time. The default value is 250 Limit xxx milliseconds (0-2000) milliseconds. AirLive WL-1000CAM User’s Manual...
-
Page 31: About
Mode) enables higher throughput than IEEE 802.11g standard (Up to 54Mbps). When the card is connecting to the Routers or APs with the proprietary Turbo Mode feature, the Turbo Mode will be enabled automatically without any configuration. AirLive WT-2000USB User’s Manual... -
Page 32: Wmm Function
When the card is connected to the AP or Router with WMM function, you can enable the function of the card by following the steps below. In the Desktop of the computer, right click “My Network Places” and select “Properties”. Right Click the “Wireless Network Connection” and select “Properties”. AirLive WL-1000CAM User’s Manual... - Page 33 Click “Configure…”. Select “Advanced” page, enable the “WMM Capable”. AirLive WT-2000USB User’s Manual...
-
Page 34: Chapter Iv: Troubleshooting
SOHO operation. What is Infrastructure？ An integrated wireless and wireless and wired LAN is called an Infrastructure configuration. Infrastructure is applicable to enterprise scale for wireless access to central database, or wireless application for mobile workers. AirLive WL-1000CAM User’s Manual... - Page 35 Even if one or more bits in the chip are damaged during transmission, statistical techniques embedded in the radio can recover the original data without-the need for retransmission. To an unintended receiver, DSSS appears as low power wideband noise and is rejected (ignored) by most narrowband receivers. AirLive WT-2000USB User’s Manual...
- Page 36 If a receiver is not tuned to the right frequency, a spread –spectrum signal looks like background noise. There are two main alternatives, Direct Sequence Spread Spectrum (DSSS) and Frequency Hopping Spread Spectrum (FHSS). AirLive WL-1000CAM User’s Manual...
Need help?
Do you have a question about the WT-2000 USB and is the answer not in the manual?
Questions and answers