Table of Contents
Advertisement
5.2
NetWare 3.x/4.x/5.x Installation & Setup
Once your print server is connected to your Ethernet network, you can set
it up for use with your networking software.
5.2.1
Installation Using PCONSOLE
5.2.1.1
Configuring as Print Server Mode
1.
Run the NetWare PCONSOLE program.
2.
Change the current file server, if necessary, using the Change Current
File Server menu selection.
3. Choose the Print Queue Information menu selection.
4.
Press the Insert key to add a new print queue.
5.
Type in a print queue name, such as "PQ" or "Q1".
6.
You have now successfully created the print queue that your print
server will serve. Press the Escape key until the Available Options main
menu is displayed.
7.
Select Print Server Information.
32
Hide quick links:
Advertisement
Table of Contents
